The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)

- - GA ISO/WTB two items needed (https://67-72chevytrucks.com/vboard/showthread.php?t=773879)

WAYNE G.

10-24-2018 10:11 PM

ISO/WTB two items needed

I'm hoping that someone would have the stainless steel windshield trim for 1969/70 blazer with the 5/8" leg, as well as the rear hatch trim that attaches to the top of tailgate for rear hatch to seal too. Looking for nice or better. Thanks Wayne G.

dirish

10-25-2018 03:17 AM

Re: ISO/WTB two items needed

Wayne, I got a reproduction rear hatch/gate piece from Carolina classic trucks. 60-80$ I think. Very nice copy. Might try them, it's been a few years.

WAYNE G.

10-25-2018 08:15 AM

Re: ISO/WTB two items needed

Quote:

Originally Posted by dirish (Post 8371298)

Wayne, I got a reproduction rear hatch/gate piece from Carolina classic trucks. 60-80$ I think. Very nice copy. Might try them, it's been a few years.

Dirish, thanks for the info on tailgate trim. Wayne

1rippen6

10-25-2018 08:55 AM

Re: ISO/WTB two items needed

Wayne the trucks are the same you may want to do a WTB ad over there since there were a lot more trucks produced.

flashed

10-25-2018 09:40 PM

Re: ISO/WTB two items needed

I have a truck cab with the stainless trim .

WAYNE G.

10-25-2018 10:15 PM

Re: ISO/WTB two items needed

Quote:

Originally Posted by flashed (Post 8371829)

I have a truck cab with the stainless trim .

Flashed, can you pm me with pictures and cost shipped to me? Thanks for a response. Wayne

flashed

10-26-2018 06:24 PM

Re: ISO/WTB two items needed

I will have to get some pics , I was hoping you would come up and remove them as I have never done that and would hate to ruin them .

1rippen6

10-26-2018 07:40 PM

Re: ISO/WTB two items needed

Use a razor knife and cut the rubber. I hope your not trying to save the rubber, I don't think they will come out that easy.

IronCanine

10-26-2018 08:54 PM

Re: ISO/WTB two items needed

2 Attachment(s)

Free to a good home. Not perfect. Both styles. Take your pick. Yellow is the best of the bunch. Can pick it up on your way to Canton ;)

flashed

10-26-2018 09:01 PM

Re: ISO/WTB two items needed

I can cut the rubber , will have to see what they look like first but think they are nice .

WAYNE G.

10-26-2018 09:15 PM

Re: ISO/WTB two items needed

Quote:

Originally Posted by flashed (Post 8372391)

I can cut the rubber , will have to see what they look like first but think they are nice .

Flashed, i will send you my original one to you as well as a new Precision Gasket Co. Seal, your choice. If you can ups it will save a lot of time. Let me know, thanks Wayne

Ps. The reason my gasket came out in one piece, it did not have the trim when I purchased the truck. Pushed on one corner and worked it around ...

WAYNE G.

10-26-2018 09:16 PM

Re: ISO/WTB two items needed

Quote:

Originally Posted by WAYNE G. (Post 8372396)

Plus, willing to pay you for the trim and shipping....

WAYNE G.

10-26-2018 09:18 PM

Re: ISO/WTB two items needed

Quote:

Originally Posted by IronCanine (Post 8372386)

Free to a good home. Not perfect. Both styles. Take your pick. Yellow is the best of the bunch. Can pick it up on your way to Canton ;)

IronCanine, fortunately you are up the road from me , are you available tomorrow? Thanks Wayne

flashed

10-26-2018 09:23 PM

Re: ISO/WTB two items needed

I will be cutting from a parts cab . About the last good parts left .

WAYNE G.

10-26-2018 09:30 PM

Re: ISO/WTB two items needed

Quote:

Originally Posted by flashed (Post 8372403)

I will be cutting from a parts cab . About the last good parts left .

Let me know and Thank you for your help. Wayne

WAYNE G.

10-26-2018 09:30 PM

Re: ISO/WTB two items needed

Quote:

Originally Posted by flashed (Post 8372403)

I will be cutting from a parts cab . About the last good parts left .

Its a 69/70 ?

IronCanine

10-26-2018 09:44 PM

Re: ISO/WTB two items needed

Quote:

Originally Posted by WAYNE G. (Post 8372401)

IronCanine, fortunately you are up the road from me , are you available tomorrow? Thanks Wayne

Should be available. Gonna be working on my brother's 69. I saw you were in Augusta, that's why I offered them up. PM me if you want my cell. I'm only an hour away from flashed.

WAYNE G.

10-26-2018 09:56 PM

Re: ISO/WTB two items needed

Quote:

Originally Posted by flashed (Post 8372403)

I will be cutting from a parts cab . About the last good parts left .

Flash, did not know that you were 1 hour away from Athens, are you available tomorrow as well? Wayne

WAYNE G.

10-26-2018 10:03 PM

Re: ISO/WTB two items needed

Quote:

Originally Posted by IronCanine (Post 8372409)

Should be available. Gonna be working on my brother's 69. I saw you were in Augusta, that's why I offered them up. PM me if you want my cell. I'm only an hour away from flashed.

IronCanine, I sent you a PM. Thanks Wayne

flashed

10-26-2018 10:22 PM

Re: ISO/WTB two items needed

My cab is a 72 . Not sure about tomorrow .

WAYNE G.

10-26-2018 10:34 PM

Re: ISO/WTB two items needed

Quote:

Originally Posted by flashed (Post 8372429)

My cab is a 72 . Not sure about tomorrow .

Np, i will pm you my phone number in case something changes. Wayne

IronCanine

10-26-2018 10:53 PM

Re: ISO/WTB two items needed

Quote:

Originally Posted by WAYNE G. (Post 8372422)

IronCanine, I sent you a PM. Thanks Wayne

Replied.

All times are GMT -4. The time now is 10:08 PM.