The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Ignition Switch (https://67-72chevytrucks.com/vboard/showthread.php?t=773950)

MacQuigley

10-25-2018 04:49 PM

Ignition Switch

1 Attachment(s)

Can anyone tell me if there is a way to get the lock barrel out the switch body without drilling it out?

Attachment 1832454

Also, is there a collar that fits over the switch barrel locking in in place from the front? There is a collar that fits on the back but Id have though there was a corresponding collar on the front.

Macdaddy1

10-25-2018 05:17 PM

Re: Ignition Switch

I looked this up in youtube and there is a pin you insert into one of the holes to depress a spring and then the switch rotates and out it comes.

MacQuigley

10-25-2018 07:05 PM

Re: Ignition Switch

Im usually so bad a finding useful videos on YouTube Ive generally given up but after your reply I tried and found this almost first time:-

https://www.youtube.com/watch?v=S2sHfit25_k

I'll give this a go in the morning.

Many thanks for the assistance.

Macdaddy1

10-25-2018 11:35 PM

Re: Ignition Switch

You are very welcome and good luck

All times are GMT -4. The time now is 07:54 PM.