The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 1 of 3

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - MI 67 GMC Parts / Part out (https://67-72chevytrucks.com/vboard/showthread.php?t=775573)

DaHos

11-20-2018 12:54 PM

67 GMC Parts / Part out

5 Attachment(s)

67 Deluxe headlight and washer knob. $50
67 GMC Custom Horn button, pits on chrome all tabs good. $75
67 7 Hole Gauge cluster $100
67 Steering wheel, minor cracks on spokes (NO major cracks!) $60
67 Rear view mirror and arm (some silvering on mirror face) $40
67 GMC 1/2 t caps - rough. 3 of them $75
67 Under dash fuse panel and harness Gauges and manual NO CUTS !!! $150
67 Deluxe chrome door panel trim (surface rust) $30 pr
67 Dash Cut (will be cut behind dash pad) $125

Misc body cuts, 3 spd and 250/6 items also ava.

PayPal or usps MO, all prices are plus shipping.....

DaHos

11-20-2018 12:58 PM

Re: 67 GMC Parts / Part out

5 Attachment(s)

Mo pics

painterljp

11-20-2018 01:31 PM

Re: 67 GMC Parts / Part out

No tailgate? Just want the gmc part from handle down to bottom. Bad shape ok. ???

DaHos

11-20-2018 01:36 PM

Re: 67 GMC Parts / Part out

Quote:

Originally Posted by painterljp (Post 8388262)

No tailgate? Just want the gmc part from handle down to bottom. Bad shape ok. ???

No gate.....sry......I need a small letter gate myself........

Merican68C10

11-20-2018 02:51 PM

Re: 67 GMC Parts / Part out

Will you take $75 shipped for the horn button?

Also I'm interested in the steering wheel pending close up pics of cracks please.

michael bustamante

11-20-2018 02:52 PM

Re: 67 GMC Parts / Part out

how are those fender badges? and maybe a combo deal for those and the horn button?

DaHos

11-20-2018 02:57 PM

Re: 67 GMC Parts / Part out

Quote:

Originally Posted by Merican68C10 (Post 8388313)

Will you take $75 shipped for the horn button?

Also I'm interested in the steering wheel pending close up pics of cracks please.

Holding at asking price plus shipping. I will get you some close up pics of wheel in a bit.

Quote:

Originally Posted by michael bustamante (Post 8388314)

how are those fender badges? and maybe a combo deal for those and the horn button?

Bottoms are rotted clean off......JUNK at best :(

Getter-Done

11-20-2018 02:58 PM

Re: 67 GMC Parts / Part out

If the gas pedal is for sale and usable I would be interested

michael bustamante

11-20-2018 02:59 PM

Re: 67 GMC Parts / Part out

dang I could have used those fender emblems too. do you the glove box door? looking for that emblem too

DaHos

11-20-2018 03:34 PM

Re: 67 GMC Parts / Part out

5 Attachment(s)

Quote:

Originally Posted by Merican68C10 (Post 8388313)

Will you take $75 shipped for the horn button?

Also I'm interested in the steering wheel pending close up pics of cracks please.

Wheel Pics:

Merican68C10

11-20-2018 03:35 PM

Quote:

Originally Posted by DaHos (Post 8388318)

Holding at asking price plus shipping. I will get you some close up pics of wheel in a bit.

Ok how much to ship horn button to 60431?

Bottoms are rotted clean off......JUNK at best :(

Posted via Mobile Device

DaHos

11-20-2018 03:36 PM

Re: 67 GMC Parts / Part out

2 Attachment(s)

Quote:

Originally Posted by Getter-Done (Post 8388319)

If the gas pedal is for sale and usable I would be interested

OE and the stud holes are still round ! $20 shipped

DaHos

11-20-2018 03:39 PM

Re: 67 GMC Parts / Part out

3 Attachment(s)

Quote:

Originally Posted by michael bustamante (Post 8388323)

dang I could have used those fender emblems too. do you the glove box door? looking for that emblem too

Keeping the GBD and emblem sry. Here is the other pr of Custom fender badges I have,,,,,,NOT great for restore but good for driver if you dont have any,,,,,$40 pr shipped.

Merican68C10

11-20-2018 04:19 PM

Re: 67 GMC Parts / Part out

Quote:

Originally Posted by DaHos (Post 8388348)

Wheel Pics:

How much to ship to 60431?

HIGHWAY BY THE SEA

11-20-2018 04:33 PM

Re: 67 GMC Parts / Part out

What shape is the front grill in?

projectking

11-20-2018 04:36 PM

Re: 67 GMC Parts / Part out

Grille top bar condition?

Getter-Done

11-20-2018 04:44 PM

Re: 67 GMC Parts / Part out

Quote:

Originally Posted by DaHos (Post 8388351)

OE and the stud holes are still round ! $20 shipped

I will take it
I will pm info in a few

DaHos

11-20-2018 05:18 PM

Re: 67 GMC Parts / Part out

1 Attachment(s)

Quote:

Originally Posted by Merican68C10 (Post 8388374)

How much to ship to 60431?

Wheel $60
Horn Button $75
USPS shipping $28
Total $163

Quote:

Originally Posted by HIGHWAY BY THE SEA (Post 8388382)

What shape is the front grill in?

BAD.... Very rusty and thin also has a nice crease thru the center.

Quote:

Originally Posted by projectking (Post 8388386)

Grille top bar condition?

I too was hoping it was good....Its straight but does have small rust holes

Quote:

Originally Posted by Getter-Done (Post 8388394)

I will take it
I will pm info in a few

Its yours, LMK

michael bustamante

11-20-2018 05:53 PM

Re: 67 GMC Parts / Part out

ill have to passon the, emblems but thank you

HIGHWAY BY THE SEA

11-20-2018 06:02 PM

Re: 67 GMC Parts / Part out

What condition is the ignition switch bezel?

too much stuff

11-20-2018 07:19 PM

Re: 67 GMC Parts / Part out

Dash pad any good?

Getter-Done

11-20-2018 07:48 PM

Re: 67 GMC Parts / Part out

Money sent for gas pedal
Thanks

HIGHWAY BY THE SEA

11-20-2018 09:45 PM

Re: 67 GMC Parts / Part out

I am interested in the rear lights wiring harness and the ignition bezel. Condition of them?

Curtb1971

11-20-2018 11:11 PM

Re: 67 GMC Parts / Part out

I would be interested in the drivers vent window if it's clear glass and driver shape. Thanks, Curt:metal:

cst204x4

11-20-2018 11:55 PM

Re: 67 GMC Parts / Part out

Hey Dave looks like the truck I saw go by my house the other day(on your trailer). Nice parts.

All times are GMT -4. The time now is 12:48 PM.

Page 1 of 3

Show 40 post(s) from this thread on one page