The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Doors (https://67-72chevytrucks.com/vboard/showthread.php?t=776162)

smokin and strokin 11-27-2018 03:41 PM

Doors
 
Who is stamping the best fitting doors for 67 through 72 C10s ?

vics stuff 11-27-2018 10:44 PM

Re: Doors
 
GM is my choice. Have seen many guys spend countless hours to get the aftermarket doors to fit properly.
Vic

Getter-Done 11-27-2018 11:16 PM

Re: Doors
 
Welcome
From Fellow Tn. guy.
Gm Goodmark doors would be the best fitting doors.
There is 2 vendors close to us that you
could contact about your options.
1st is Southern KY classics
2nd Huey's Classic car parts in Jamestown Tn.
I bought full floor pan for SoKy classic and
Firewall, rockers and cab corners from Huey's.
I have yet to put them on.
So I can not tell you how they fit.

smokin and strokin 11-27-2018 11:23 PM

Re: Doors
 
Thanks for the imput I heard key parts Triplus these cabs are not the same as well but in a whole who's doors are fitting the best. I got a woodall floor as well it fit pretty good with just a little bit of fitting

darrellyates 11-28-2018 12:30 AM

Re: Doors
 
2 Attachment(s)
Since you're in Castalian Springs... Send me a PM and come look at my aftermarket doors. I'm about 15 minutes away from you. They are pretty good... Will try to send a PM as well...

darrellyates 11-28-2018 12:34 AM

Re: Doors
 
Quote:

Originally Posted by Getter-Done (Post 8394133)
Welcome
From Fellow Tn. guy.
Gm Goodmark doors would be the best fitting doors.
There is 2 vendors close to us that you
could contact about your options.
1st is Southern KY classics
2nd Huey's Classic car parts in Jamestown Tn.
I bought full floor pan for SoKy classic and
Firewall, rockers and cab corners from Huey's.
I have yet to put them on.
So I can not tell you how they fit.

I can.... The floor, firewall, and rockers are all pretty good. I did no work on the floor I bought (Tri Plus), and very little on the rockers. The cab corners will require lots of work (they all do in my opinion) and the doors are in-between. Southern Kentucky's parts are as good as any, and I got a bunch from Truck Haven in Unionville (Chuck did some trading with me, he's a good guy...).

All us TN guys should get together for breakfast one day...

Best wishes!

Getter-Done 11-28-2018 12:48 AM

Re: Doors
 
Quote:

Originally Posted by darrellyates (Post 8394199)
I can.... The floor, firewall, and rockers are all pretty good. I did no work on the floor I bought (Tri Plus), and very little on the rockers. The cab corners will require lots of work (they all do in my opinion) and the doors are in-between. Southern Kentucky's parts are as good as any, and I got a bunch from Truck Haven in Unionville (Chuck did some trading with me, he's a good guy...).

All us TN guys should get together for breakfast one day...

Best wishes!

Sounds good thanks for the info.
My floor pan looks real good.
I like dealing with SoKy Classic.
I agree I have yet to see a cab corner that
didn't have to be pie cut or tweeked.
I have only talked to Chuck on the phone.
I plan to take a trip there soon.
Breakfast sounds good :mm:
Your truck looks Great.

darrellyates 11-28-2018 12:50 AM

Re: Doors
 
I have only talked to Chuck on the phone.
I plan to take a trip there soon.
Breakfast sounds good :mm:
Your truck looks Great.[/QUOTE]

Thanks for the compliment. Use my name when you talk to Chuck, he knows me pretty well. My truck is on his website and most of his social media sites.

He has always been pretty fair with me.

I'm serious about breakfast sometime!!!


All times are GMT -4. The time now is 01:54 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com