Difference in consoles
 

Trying to see if anyone has info or a preference mainly on an original center console compared to the repop consoles. This is my first pickup with bucket seats and it had a later model console in it so I’m not sure how the original was compared to new ones. I’m trying to get one bought for my 71 and if i need to wait and find a nice original I can or if the new ones are good I’ll get one of those. Thabks

Re: Difference in consoles
 

I used a reproduction in my truck. I like it. And yes, I admit it isn't original.

However, it has round holders for drinks instead of the small square slots for the original seat belts. I find it more practical for actual use.

I also prefer the height of the console to be raised a little from the stock location. I built mine up about 4 1/2 inches. I made it tall enough to mount the amplifier for the stereo under it, with enough room for airflow.

Others may/will disagree with my decision, but again, it's about personal choice. I paid less than $100 for the reproduction console, and since nothing else about my truck is absolutely stock, it fits with the theme just fine.

Final note, I am not sure what year they actually started using consoles in pickup trucks. Everything I read says they are "Blazer style" reproductions. I think bucket seats in '67 and '68 were all buddy buckets, with a center fold up/down seat back for the center section.

If you're going for absolutely stock, I am sure there are answers using the search engine on this site. Others will know for sure.

I would say use what you like, unless you are doing a true restoration.

Best of luck!

Re: Difference in consoles
 

If you need an original console in nice condition I have one for sale in the MarketPlace on FaceBook and C10ClubGa page on FaceBook .

Re: Difference in consoles
 

As you likely know, up to 72 had the square seatbelt holders, then 73+ had round cup holders. The cup holders are likely a lot more practical if you're not hardcore about originality!

Re: Difference in consoles
 

Just keep your eyes open ,I found this one in very nice condition from Craigslist in Ponte Vedra beach Fl for $125.00 :chevy:

Re: Difference in consoles
 

Nice score!! It's good to see there are some people that sell nice things, that aren't also trying to retire off of your purchase!!

Re: Difference in consoles
 

I messed with a few consoles about 15 years ago and iirc the cup holder insert could be exchanged in place of the seatbelt holder insert.

Re: Difference in consoles
 

I think the square seatbelt holder was used until 76 or 77.
Watch for someone parting a blazer up to the early 80s and you may find one.

Re: Difference in consoles
 

There’s just something about a real nice original one that just looks right. Not that the new ones don’t, they just seem to be a little thinner and flimsy. I’m not 100% purist must be original on it since it’s got a couple little doo dads that are changed but I think the cup holders would be more practical.

Re: Difference in consoles
 

Not stock but building this one. Not that difficult if you have time