The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Question on power brake conversion (https://67-72chevytrucks.com/vboard/showthread.php?t=778303)

Knight72 12-28-2018 02:40 PM
Question on power brake conversion
 
Hey guys, I hit the search but couldn't find what I was looking for. Is there any need to change the brake lines when converting to power brakes from manual? I noticed two full brake line kits online, but my manual lines are in good condition. Thanks in advance.

demian5 12-28-2018 02:44 PM
Re: Question on power brake conversion
 
No. The brake lines on the truck itself from after the combo valve will work. If its a disc drum already, then you should be able to just bolt the lines before the combo valve to the master and go (with proper bleeding of course).

Knight72 12-28-2018 02:56 PM
Re: Question on power brake conversion
 
Quote:
Originally Posted by demian5 (Post 8414750)
No. The brake lines on the truck itself from after the combo valve will work. If its a disc drum already, then you should be able to just bolt the lines before the combo valve to the master and go (with proper bleeding of course).
Thanks, it is disc/drum.


All times are GMT -4. The time now is 04:15 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com