The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Engine decode? (https://67-72chevytrucks.com/vboard/showthread.php?t=779077)

stilldreamin6772 01-07-2019 09:43 AM

Engine decode?
 
1 Attachment(s)
Can anyone tell me what I have here? I know it's a 305. But wondered if I could get any more info for ordering parts. I looked up the casting # but can't seem to find it. I found 14088 but not 14084? Any help is as always appreciated. The number is 14084766

geezer#99 01-07-2019 10:49 AM

Re: Engine decode?
 
Look a little closer.
I think it’s 14094766.
Which makes it found here.
https://www.mortec.com/castnum.htm

If you get the suffix code off the pad in front of the pass side head you’ll narrow it down even more.
Look here.
http://www.nastyz28.com/decode.html

stilldreamin6772 01-07-2019 04:02 PM

Re: Engine decode?
 
Geezer thanks it just might be.... trying to read it on my phone is not so good....

Vero67 01-13-2019 10:09 PM

Re: Engine decode?
 
look at the pad on the front left side, then gooogle nasty z28 engine decoder. It will give year, model hp, etc.

jocko 01-13-2019 11:35 PM

Re: Engine decode?
 
here: http://www.nastyz28.com/chevy-engine-code-stampings.php
once you get the code off the pad in front, use the three letter suffix and look it up on thi page - links are about 3/4 the way down the page and are grouped into alphabetical links.

stilldreamin6772 01-14-2019 05:15 PM

Re: Engine decode?
 
Thanks all... do I need to remove the alternator or valve cover to see it. I looked but don't see it. Total noob... sorry

Vero67 01-14-2019 05:42 PM

Re: Engine decode?
 
It might be painted over. it is on the front of the block where the head attaches. it sticks out a little.

stilldreamin6772 01-14-2019 06:18 PM

Re: Engine decode?
 
3 Attachment(s)
Quote:

Originally Posted by Vero67 (Post 8443433)
It might be painted over. it is on the front of the block where the head attaches. it sticks out a little.

I swung the alternator out of the way. This is what I have.


All times are GMT -4. The time now is 10:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com