The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Fuel tank with receiver hitch (https://67-72chevytrucks.com/vboard/showthread.php?t=779173)

72kool 01-08-2019 06:17 PM

Fuel tank with receiver hitch
 
Ive been searching the forum and have not found an answer. i am going to relocate the fuel tank but have not seen it done with a receiver hitch mounted to the frame rails. what tank will work for me? i like boyde tanks, but not the price. going efi in the future so that is a needed feature to the tank if possible. i can work around it though if not available. whats my options?

Already Gone 01-08-2019 06:42 PM

Re: Fuel tank with receiver hitch
 
If you do not already have the hitch installed get one of thses hitches then you can use any tank you want.

https://www.earlyclassic.com/node/1309

burnin oil 01-08-2019 10:17 PM

Re: Fuel tank with receiver hitch
 
Any real Reese hitch with work with an inframe tank. I have a 31 gal blazer tank from the late 70s along with the reese hitch that came off the donor truck on my 72. As long as the tank fits between the rails the hitch will clear. Worst case is you may have to slightly clearance the mounting ears with a grinder. Only issue I had was my bent step bumper interfers with the slider. I need to bend it back or space the hitch down an 1/8".

72GreenMonster 01-20-2019 10:19 AM

Re: Fuel tank with receiver hitch
 
72 Kool, Im looking to do the same. Currently installing the 17 gallon blazer tank kit from Truck shop in Orange. $189. The tricky part was removing the monster of a tow hitch the dealer installed back in the day. After reading here and etrailef I ordered draw tite 71540 and looks like it will take a bit of fabrication to make it work. Challenge is the flange furthest back shares a similar hole location with the tank. I will soon share some pics but will look to a friends shop for assistance on a lift. The draw tite was $113 on Amazon and was purchased after not finding exact answers on my 3/4 ton with step bumper which gave me 7-8 inches from bottom of frame to top of hitch. Hoping for a win win but will report back. Class 3 and I need to tow my boat. Its been a challenge but hope the fabrication is minor. Will post soon. Good luck and please share your final setup.
Thanks

Vero67 01-24-2019 08:57 PM

Re: Fuel tank with receiver hitch
 
I put the LMC side fill tank in my 67 K10, no problems with the hitch.


All times are GMT -4. The time now is 11:29 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com