The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - VSS/Dakota Digital (https://67-72chevytrucks.com/vboard/showthread.php?t=779216)

SunSoaked

01-09-2019 01:28 PM

VSS/Dakota Digital

This fit several topics so I put it here for greatest response.

I want to install the DD VHX instrument panel. I have already had the 205 modified by ORD to use the 40 ppr vss.

Dakota says their guages work with any output of 2k ppm or greater.
Anybody know the conversion from ppr to ppm? Why's it always complicated!

sweetk30

01-09-2019 03:57 PM

Re: VSS/Dakota Digital

guy on my other site ck5.com just did d.d. dash unit in his crew cab 8.1/allison swap with 205 .

Big Moose

01-10-2019 12:02 AM

Re: VSS/Dakota Digital

Once you have the gauges installed and working it's easy to calibrate the speed, Probably not too critical what your ppr is.
The calibration is easily adjusted up or down after the initial calibration

1957 Chief

01-11-2019 11:48 AM

Re: VSS/Dakota Digital

Just like what the other guys said, it's easy once you get the truck moving. I think there are like 3 ways to set the speedo, and then there is also another function for you to fine tune the speed.

Bubba

All times are GMT -4. The time now is 02:01 AM.