4 x 4 axles for sale
 

I have a set of 4 x 4 axles for sale.
they came from a 73 k5 blazer
the front is a dana 44 with disk brakes and 4.10 gears
the rear is a 12 bolt with 4.10 gears and a posi
both are in working condition the front might need new calipers
I'm asking $300 for both. please reply to the thread.

wish you were closer, id snatch them up in a heartbeat

Might be interested, only need the front though so how much lower would you go, or would you seperate?

I'd take 250.00 for them.
I'd rather sell them as a pair.
You can call me at 937-623-1769
I could seperate them I guess.
mike

I also have a three speed trans and transfer case
from the same 73 blazer for sale.
the transfer case is a part time unit
$75 for both. I'd prefer not to try and ship them

OK how much for just the front axle, I can pick it up in Xenia.

$125 for the front axle

Thanks, I really want to find one in $75 range as I am going to strip it for the brake parts only.

I have 2 sets of complete axles front and rears. $50.00 a piece (no shipping)

Dalejr, do these need rebuilt? what year are they?

MARK540 AS FAR AS I KNOW THEY DO NOT NEED TO BE REBUILT THEY WORKED FINE WHEN I PARTED OUT THE TRUCKS ONE SET IS A 79 AND ONE IS A 82

OK I need these axles gone!
I'll take $250 for everything.
axles, trans, and transfer case.
maybe willing to trade for some good tires (33x12.5x16.5)

I'd love to pick up that dana 44. I am in Ohio. Would it take any modifications to put it on my 82? I am in the process of taking out the front end to put on a lift. Now would be the time to switch axles. I have already changed the rear over the weekend to a 14 bolt 8 lug rear end. Thanks

my axles are 6 lug I dont know if that matters to you.
From what I can tell the front should bolt in as well as the rear.
check out my other thread called "axle fitment"
thanks, mike

Could you check the spring pad width on the back axle, I might do a total change out if you still have them available.

THanks Mark

I'll check it out tonight.
give me a call if you want info quicker
937-623-1769

I just converted to 8 lug, so I can't use the 6 lug. I really wanted a dana for my front end :( Thanks anyway...

the rear axle is 42.5" from spring center to center

hey mnick did u ever get that 68 going i just wondered what it looks like now

I sold off some of the parts, the cab went to the scrap yard it ended up being worse than the one i had.. the only thing I'm using from it are the doors.

aww man sorry bout that were te fenders good off it i never realy tore in to it much to see how bad it was

still got the axles/trans/transfer case? what trans and case is it?

yes, I still have all of it the trans is a 3 speed manual and
the transfer case is (a 205 i think) part time and gear drive
unit

TTT

what do you want for just hte case?