K30 454 header recommendations
 

Instead of restoring the stock exhaust manifolds on my 85 K30, I'm thinking of installing headers, it's a stock 454 with performer intake and carb. Opinions on long, short or tri Y? Probably going with Doug's.

Re: K30 454 header recommendations
 

Best thing I ever did to my 454 was putting the cast iron back on

Re: K30 454 header recommendations
 

I have a feeling that's a good idea, gonna have to check out the overall condition of the stock manifolds first, just want to get the truck licensed and end up with a good sounding exhaust, not looking for any big power gain, 200 hp is enough for what I do. May end up selling it anyways. Thanks for the input.

Re: K30 454 header recommendations
 

When I put the cast iron back on I went with 2.5 from the pipes into a flowmaster Y pipe to 3'' single. Truck seems to have a lot more low end power...which is what a 454 is built for. Mileage is better also....I know that is relative with a big block. The headers in the long run were a real pain in the...

Re: K30 454 header recommendations
 

It has flow masters on it now, but the exhaust is so scabbed together that I'm going to replace everything and start over. Looks like it has the factory Y pipe to at least 3" pipe dumping in front of the rear dif, it's terrible. I didn't know that Flowmaster makes the correct Y pipe that'll bolt onto cast iron manifolds, trying to stay away from the exhaust shop.Called the only local machine shop we have for prices to get the stock manifolds cleaned up: bake $60 pair, plane if needed $120 pair, I'll get the studs out at home otherwise $60/hour for that.

Re: K30 454 header recommendations
 

Looked all over the inter net for a factory fit Y pipe, Anyone know where I can find one? Thanks!

Re: K30 454 header recommendations
 

Had to have the pipes made off of the manifold into the flowmaster Y pipe....here

https://www.summitracing.com/parts/f...QaAiEFEALw_wcB


then into the muffler and out the back. 3 '' single pipe is plenty unless your going to put in on the track

Re: K30 454 header recommendations
 

Thanks for the info, I have it saved.

Re: K30 454 header recommendations
 

I did the same thing, but used the Magnaflow version of the Y. 3" high-flow cat to replace the old pancake style and the biggest Magnaflow muffler I could stuff under it. Nice and quiet on long drives..no drone. More power, better mileage.

Re: K30 454 header recommendations
 

I’ve used headers for many years on all kinds of chevy engines. This is a 84 K30 dually single cab with Headmans. Dual pipes run out to the back. What ever headaches I encounter with em is worth it to me...

https://i.postimg.cc/yxWV8yxH/1-A740...6-F7-C6-CA.jpg