Found a '67-72 C60... Horseshoe engine mount same as '60-62?
 

Like the title says, I found a '67-72 C60 in a junkyard. It's got the front Horseshoe engine mount that looks real, real similar to the one in my '62.
But I can't hold the two up together to see.
The one thing I notice is the one in the C60 has no bolt holes for the 6 cylinder engine, just the pair for the V8.

I can get it cheap, but I really don't want to throw away the money unless I know it'll fit.
(and the only reason I want it is as a back-up in case I screw up modifying mine to clear the Power Steering pump bracket I'm going to install)

Re: Found a '67-72 C60... Horseshoe engine mount same as '60-62?
 

what engine is it bolted to? Should have 2 set's of holes, one set for the sbc and the other for the 348/409. If i remember right the 6 cyl is different.

Re: Found a '67-72 C60... Horseshoe engine mount same as '60-62?
 

No engine. Just the horseshoe bolted to the frame.

Re: Found a '67-72 C60... Horseshoe engine mount same as '60-62?
 

Brad--here are some pics 235 mount and a V8 mount and mine that i modded. could be an other mount that i don't know about.

Re: Found a '67-72 C60... Horseshoe engine mount same as '60-62?
 

The only 2 differences I can think of would be the possibility of a different hole pattern for the rubber mount on the bottom and a difference from the bottom of the horseshoe to the center of the crank. A few minutes measuring should tell yiu if it will work