WTB - Rear Spring Hangers
 

Wanting to buy rear leaf spring hangers - converting to 63'' rear springs and need a clean set of hangers

Re: WTB - Rear Spring Hangers
 

I have several to choose from. What style/profile hangers are you looking for? All 4 or just the rear of the rear?

Re: WTB - Rear Spring Hangers
 

You might wanna ask specifically for K10-k20, C30, or k30

Re: WTB - Rear Spring Hangers
 

Really not sure on all the differences. It seems like the 73-87 spring hangers hang lower off the frame allowing slightly more lift. Currently I have a set of 63'' springs with 5'' of lift. I am going to want an additional 5+ '' so my thought was using the brackets that hang lower? Not sure all this is making sense. The current set on my frame would work just figured a newer model set might gain me some additional lift.

Re: WTB - Rear Spring Hangers
 

I would want a full set if I was to change them out

Re: WTB - Rear Spring Hangers
 

Differences in the length the hangers hang away from the frame to line up the springs. C30 are shorter than k30 but hang off the frame narrower than that of the k10 and k20. I put squarebody k20 hangers on mine, which made it level, but I just have a 3/4 ton rear out of a square body that lines up for mock up. I may change out to K30 hangers yet. 67-72 Hangers hang the same distance away from the frame as c30-k30’s. All of this was trial and error. Honestly, I think you could make the factory Duramax hanger work fine in your application.

Re: WTB - Rear Spring Hangers
 

Here was a pic from my diesel donor of the stock hangers.

Re: WTB - Rear Spring Hangers
 

measure the center to center of the leaf pad mounting on your axle now .

42.5 = k5-c/k10-ck20

40.5 = c/k 30

other wise you will be moving and welding perches on the current axle .

what year frame now are you using ? whats the axle from ? this has the most importance over the springs as they will fit any of these hangers . its the spacing of the hanger that makes the choice .

as said c-lower hangers and k- taller by 3" on the hangers . for the front hanger of the rear springs only .

Re: WTB - Rear Spring Hangers
 

i forgot you can do a home brew flip kit with a extra set of front hangers like i did here . these were 2wd short hangers and 6" long shackles for 2.5-3" lift height in the rear of my last build .

found the height i wanted then cut off extra and welded a chunk of angle on the bottom to catch the bottom lip of the frame and 4 bolts per side and 2 in the bottom just like oem rear hanger .

Re: WTB - Rear Spring Hangers
 

SweetK30 - Any issues with "sway" in the rear end with reverse shackles? Any load carry capacity reduction? Does it require a Track Bar ?

Re: WTB - Rear Spring Hangers
 

Frame is a C-30 with 40.5'' perch spacing

So I think what you are saying is I would need K30 brackets - they would be longer than the c-30 ones that I have correct??

Re: WTB - Rear Spring Hangers
 

yes 1 ton brackets .

yes 3" taller for the front hanger / bracket only . the rear stays the same .

no real difference i have noticed . i use to run a 4" offroad design flip kit on my old truck and when i scrapped it and built this one to replace it i went less lift for more of a work truck .

i have the 4" flip kit brackets i would sell . there a bit rusty from upstate new york salt belt life . but still super solid and i would use them again if i had to . i will also check i might have a set of k30 front hangers .

Re: WTB - Rear Spring Hangers
 

Any K30 hangers out there???

SweetK30 - any update

thanks

Re: WTB - Rear Spring Hangers
 

dude sorry . crazy busy week . just got done with my first d-max water pump job .

i hit you up this weekend for sure .

got your pm . but i got a stupid phone ( flip ) i dont text a lot with pics :lol::crazy::haha: . drop me a pm with your email .

Re: WTB - Rear Spring Hangers
 

I have OEM 1 ton 4x4 rear spring front hangers from 87 V3500 dually dump, fronts only. KrazyRay may have full set or rears. Your frame rails measure 34" outside?

Re: WTB - Rear Spring Hangers
 

GonicGM - yes the frame is 34'' out to out and the spring hangers are 3'' to the center past edge of frame. Any pics of the 87 front hangers?

Re: WTB - Rear Spring Hangers
 

I have a full set of OEM 1 ton hangers pulled from a 79 K30 $200 plus shipping.

Re: WTB - Rear Spring Hangers
 

Not to try and jack your thread but if you don’t get these fronts I’d be interested. Making my own thread but while searching I came across yours go figure we are doing something so similar.

Re: WTB - Rear Spring Hangers
 

I have a set of rear/rear hangers off my 89 V3500. I will post a pic with measurements tomorrow.

Re: WTB - Rear Spring Hangers
 

Wanted to let you in on where I am with my search. I found some and will be picking them up this weekend. From what I’ve gathered even the 1/2 and 3/4 can have the narrower 40.5 spring spacing like the 1 tons being the 67-72 4wds has the straight rails in the rear. Unconfirmed but will be able to by Sunday.

Re: WTB - Rear Spring Hangers
 

That is incorrect for 73-87, but all 67-72 4x4’s used the same hangers at 40.5.

Re: WTB - Rear Spring Hangers
 

Think Ill just use the ones I had. Getting a one ton set would allow me to drop the front of the spring lower getting me a little more lift but then it would kick the pinion down. Ill just use these and add a block. The springs themselves probably got me 6'' of lift - another 4-6'' block should get me level Any one have some longer ubolts.....

Re: WTB - Rear Spring Hangers
 

Does that r3ear shackle angle look good considering no weight??

Re: WTB - Rear Spring Hangers
 

Here is mine with just the weight of the bare chassis. I think you’ll be pretty spotnon especially with the longer springs as they flatten out. And just in case you are still wanting to go lower on the front, you could always do a shackle flip in the rear, only downside is a softer progressive rate so it wouldn’t be so good for towing but I’ll have a set of bags also so for me it’ll be just right.