The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Motor placement fore / aft (https://67-72chevytrucks.com/vboard/showthread.php?t=781624)

St Cloud Rustoms

02-17-2019 01:11 PM

Motor placement fore / aft

I'm getting ready to put the drivetrain in the truck, 63 GMC.

The PO pancaked the front cross member and moved it 1" forward. Trying to decide on where to put the motor, small block / th400 combo. Move it 1" forward or keep it in the stock location.

Any input is appreciated, I haven't seen to be able to gather much info on this when others have moved the cross member forward.

The Rocknrod

02-17-2019 01:51 PM

Re: Motor placement fore / aft

Have you mocked up the motor/trans yet? In the stock location?

St Cloud Rustoms

02-18-2019 10:17 AM

Re: Motor placement fore / aft

I haven't yet. I don't foresee any issues with it going in the stock location. Just wondering if it should move forward with the cross member for any type of weigh distro concerns.

Captainfab

02-19-2019 01:00 AM

Re: Motor placement fore / aft

For weight distribution, you want the engine and trans as far back as possible.

Quote:

Originally Posted by St Cloud Rustoms (Post 8468738)

I haven't yet. I don't foresee any issues with it going in the stock location. Just wondering if it should move forward with the cross member for any type of weigh distro concerns.

All times are GMT -4. The time now is 12:44 AM.