|
Patina Front Bumper w/Guards
1 Attachment(s)
Decent bumper with guards and brkts. $100 local pickup only. Please respond in the post. First take it gets it. I don’t mind storing for a while if it’s paid for.
|
Re: Patina Front Bumper w/Guards
1 Attachment(s)
2222
|
Re: Patina Front Bumper w/Guards
1 Attachment(s)
3333
|
Re: Patina Front Bumper w/Guards
1 Attachment(s)
4444
|
Re: Patina Front Bumper w/Guards
what year is the bumper?
|
Re: Patina Front Bumper w/Guards
Not sure. Got it in some parts I bought. Not as familiar with 60-66 trucks. Maybe someone will chime in shortly.
|
Re: Patina Front Bumper w/Guards
I was just told 63-66.
|
Re: Patina Front Bumper w/Guards
That is a neat piece that would complement a patina truck quite well. I don't have the money for it, but I wish I did.
|
Re: Patina Front Bumper w/Guards
Is the rust all the way through on the guards?
|
Re: Patina Front Bumper w/Guards
I would say it's 60-62 based on how close the bolt holes are. 63-66 has a bigger spread.
|
Re: Patina Front Bumper w/Guards
I'd be interested if you could ship it. If there's any possibility it would be to 98264. Thanks, Ron
|
Re: Patina Front Bumper w/Guards
Ron I've FedEx'd these bumpers without any packaging, FedEx has a special pouch that you can zip tie through the bolt holes. But there can't be any sharp edges so the brackets would have to come off (the guards should be fine though). You could probably mail him a label and then have FedEx go pick it up.
|
Re: Patina Front Bumper w/Guards
Yes there is some rust through in one if not both guards down low. Try to get better pics later today.
|
Re: Patina Front Bumper w/Guards
I've never dealt with shipping items. Is there any chance you can give me a quote to ship it to 98264? Thanks.
|
Re: Patina Front Bumper w/Guards
Looking through the Engineering book in 63 there's a statement about how they started to recess the bumper bolt holes as of 63. Noticeable on Suburban rear bumpers especially. 62 and below seem not to have this recess. Can anybody verify and does this bumper have the recess around the opening for the bumper bolts?
|
Re: Patina Front Bumper w/Guards
2 Attachment(s)
I also think it might be a 60-62 bumper. The top, center bolt holes look to have a shorter distance from the bottom bolts than on my 63
|
Re: Patina Front Bumper w/Guards
If it is a 63-66 bumper, would you be interested in a trade? My bumper + cash for yours
|
Re: Patina Front Bumper w/Guards
cwcarpenter98 your black headlight bezel treatment is still showing.Impressive.
|
Re: Patina Front Bumper w/Guards
Quote:
|
Re: Patina Front Bumper w/Guards
1 Attachment(s)
I think you are correct on this being an early bumper. I found another one that I had that shows the same spacing difference. Anyway here are a few more pictures.
|
Re: Patina Front Bumper w/Guards
1 Attachment(s)
22222
|
Re: Patina Front Bumper w/Guards
1 Attachment(s)
33333
|
Re: Patina Front Bumper w/Guards
1 Attachment(s)
44444
|
Re: Patina Front Bumper w/Guards
1 Attachment(s)
55555
|
Re: Patina Front Bumper w/Guards
1 Attachment(s)
66666
|
| All times are GMT -4. The time now is 07:37 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com