Need some measurements for bucket seat mounting
 

Hello members. I'm in the process of modifying a pickup cab floor for my 72 Blazer project. Currently there are bench seat holes however I'm installing a set of oem sport seats and console. I'm looking for some measurements on the driver’s seat mounting for the four front seat track mounting points. I have a picture of the floor with some crude lines drawn. The measurement points that I'm looking for is the first mounting hole closest to the driver’s door at the edge of the seat tower then the 2nd, 3rd and fourth holes. Any help would be appreciated. Thanks, Mike

Re: Need some measurements for bucket seat mounting
 

Check out this thread and the other threads posted in it. It may have what you are needing


https://67-72chevytrucks.com/vboard/...e+measurements


.

Re: Need some measurements for bucket seat mounting
 

Yep all ready saw this one and a number of others. Problem these reference holes in factory pans. None these diamentions line up with this reproduction pan. If someone here can provide at least a measurement from the edge of the seat tower to the first hole, I can go from there.

Thanks

Re: Need some measurements for bucket seat mounting
 

I have the seats out of mine. I will go see about drawing it out

Re: Need some measurements for bucket seat mounting
 

Here is a crude drawing. Let me know if you need anything else.

Richard

.

Re: Need some measurements for bucket seat mounting
 

I almost incorrectly assumed that both sides would be mirror imaged but they are not

Re: Need some measurements for bucket seat mounting
 

And all of this is based on a measurement of 57" outside to outside on the rounded tower start point.

Re: Need some measurements for bucket seat mounting
 

Hello Richard, Perfect! Thank you for your time...........Mike