![]() |
Exhaust choices
I’m looking at a couple of choices for exhaust.
1. Heartthrob has a kit 2. Hooker 16527HKR The hooker kit looks to be discontinued but can be found here and there. The heartthrob kit looks like a viable option but I am unsure if it is alumanized for rust. I don’t think the hooker is either. What are people’s experience? I have an LS swap so I’m thinking I’ll have to do a little cutting but not a big deal. I’m thinking 2.25 should work fine. That’s the size of the manifolds anyway. |
Re: Exhaust choices
4 Attachment(s)
I'm running the Heartthrob kit , I was pleased with the install. I did it in my drive way in a couple hours. The right side tucks higher than the left but the tailpipes come out just right.
|
Re: Exhaust choices
http://heartthrobexhaust.com/4159M.html Here's more info. I will say, it does come close to the t-case on that right side.
|
Re: Exhaust choices
Thanks for the pictures. Are the pipes straight that pass the transfer case on both sides?
|
Re: Exhaust choices
Yes they are. Glad I could help.
|
Re: Exhaust choices
I think the pipes on the hooker kit are curved on the passenger side. The old pipes I pulled off were. I think I might need a curve due to the pipes off my manifolds dropping lower.
|
Re: Exhaust choices
1 Attachment(s)
These tuck pretty tight.
|
Re: Exhaust choices
Definitely looks good. I’ll look into it more. Thanks for the info.
|
Re: Exhaust choices
I've used the Heartthrob exhaust at least 3 times over the years and would use it again.
|
| All times are GMT -4. The time now is 04:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com