![]() |
Is There a Non Sincro 1st gear 3 Spd in a 67/68
Does anyone have/had a 67 or a 68 3 speed with a non syncro first gear. I thought they were all syncro after 66 but I have read in trucks the base trans up to 68 was a CS10 Syncromesh 3 speed and the next option up the list was a CE10 FULLY SYNCRONIZED. GM's description and wording. In the 69 option list, the only 3 speed is the fully syncronized one. I am looking for the linkage from the column to the transmission for the NON syncro transmission in another thread and I need to know if they even made them. Thanks.
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Yes, my Dad had a 68 c10 like that when I was growing up, that I believe was original
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
My 68 3 speed is non synchronized.
Ron |
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
I don't claim to be an expert on the subject but this is what I've experienced in 30+ years of hands on with these trucks. Never seen a 4 bolt side cover non synchro 1st column shift 3speed in any C series '66 and up, 6 or V8. I looked over at the GM heritage site for transmission lineup for '67. Shows what you found: base 6 cylinder 3 speed C10 uses a different ' synchromesh ' then all of the other C 10-30 series. The description of the three speeds available is very vague. They show a single picture to represent all of the three speeds available and it happens to be the older 4 bolt Muncie pictured (?!) Makes no sense at all (?)
I own a very typical almost zero option '67 C10 with the base 250 6cylinder and three speed on the column. My truck has the Warner (NOT a Saginaw NOT a 4 bolt Muncie) three speed column shift that I believe has an 8 bolt side cover and does not have a synchronized first gear. Everything about this truck looks completely original and unmolested. I'll try to get some pictures of this if I'm at the house this weekend. Steve weim55 Colorado |
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
No synchros in the 67 3 speed I have sitting in the shed for years
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Sure when I get home if I don't forget.
Ron |
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
My ‘67 L6 GMC SPID shows SM318 for the tranny...1st gear is not synchronized....
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
2 Attachment(s)
Here is mine. I swapped to a 5 speed.
Ron |
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
I know that in canada 1967 and 68 trucks had NON-syncro for sure. at least as base equip.
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
Steve weim55 Colorado |
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
This is the original three speed in my '67 250 6 cylinder C10. It is a 9 Bolt Side cover Warner T89. Only second and third gear are synchronized. This transmission was the optional heavy duty three speed for most Chevrolet trucks 1955 through,I believe, 1966. Wondering if Chevrolet may have used these on the base six cylinder C10 in 1967 in 1968 (??). Wondering if GM had a stockpile of these transmissions they needed to use up and just got rid of them on the base trucks for those two model years (??) This particular truck did not come with an SPID for me to cross just in case there is a possibility there was an option for this as a HD 3 speed upgrade as in '55- '66.
Steve weim55 Colorado |
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
1 Attachment(s)
Warner T89
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
You still got real snow. Mine is on it's way out! |
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
I will have to round up the shift linkage. Ron |
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
|
Re: Is There a Non Sincro 1st gear 3 Spd in a 67/68
Quote:
Steve weim55 Colorado |
All times are GMT -4. The time now is 12:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com