The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   Update on what I have to sell !some real goodies (https://67-72chevytrucks.com/vboard/showthread.php?t=78411)

gn4u2c 11-26-2003 11:08 AM

Update on what I have to sell !some real goodies
 
I have a 4x4 sm465 attached to a np 205 works 100 % ..thats right the tough stuff !!! $175.00

I also have a sm 465 4x2 with bell,clutch,flywheel all 100% $50.00

I have a 14 bolt non FF $10.00 drum to drum. not sure what gears non posi.

I have a 14 bolt FF yes the good one drum to drum 3.73 gears
$100.00

I have 2 perfect working np203 's one is from a 74auto one is from a 75auto $75.00 each.

set of 10 bolt rears with auto hubs complete with 3.73 's $200.00 for the set.

I would like you to pickup items. I can deliverup to 25 miles for gas money. I can meet you along I-83 or whatever
e-me any questions you may have about pickup or delivery.

Old Chevy Lover 11-27-2003 02:20 PM

What's the width on the 14 bolt FF? either backing plate to backing plate, outside drum to drum? Also, what is the width of the mounting pads? Where are you located at in PA?

gn4u2c 11-28-2003 12:34 PM

glenville pa 17329 or you can pick it up at my pops house parkton md 21120
I will measure it sat am for you.

Old Chevy Lover 11-28-2003 12:59 PM

ahh.. I was hoping you were a lot farther west. I am in Ohio, and would be a little too far to drive just to get a good rearend. thanks anyway.

LKJR 11-29-2003 02:18 AM

I"m looking for a set of spring plates for the 14FF any chance you have a set of those?


All times are GMT -4. The time now is 02:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com