Need Lower Control Arm Shafts - Torsion Bar 1960
 

So Im looking for lower control arm shafts for a 1960 with torsion bar suspension. I was able to get a left one but cannot find a right one.

Anyone know who has them in stock?
OR
can I just buy new caps and install those - as those seem to be the wear items. If so, where could I get those? Are the caps the same as a 63-72?

Re: Need Lower Control Arm Shafts - Torsion Bar 1960
 

Here is a place, does not say the right side is out of stock, but dang its expensive...
https://www.performanceonline.com/19...haft-assembly/

This one says "RIGHT"
https://www.ecklers.com/chevy-truck/...-247841-1.html

"LEFT"
https://www.classicparts.com/1960-66...tinfo/74-310L/

"RIGHT" (shows out of stock, but the same for 63-66 3/4 ton??)
https://www.classicparts.com/1960-66...tinfo/74-310R/

Re: Need Lower Control Arm Shafts - Torsion Bar 1960
 

Solid info.

Hmm, i did not know this...

Re: Need Lower Control Arm Shafts - Torsion Bar 1960
 

I have a 1960 C-10 frame with the torsion bar frontend that I will be parting out for any usable parts. Hate to throw away old iron from a classic truck. Are the lower controls arms a pain in the rear to remove? I might try removing them and post them up for anybody looking for some OE stuff.

Re: Need Lower Control Arm Shafts - Torsion Bar 1960
 

Easy to remove. Most remove the bars and cross member.

Re: Need Lower Control Arm Shafts - Torsion Bar 1960
 

You can buy the end caps. I bought mine years ago from Truck and Car Shop. :metal:

Re: Need Lower Control Arm Shafts - Torsion Bar 1960
 

Do you happen to still have that front suspension your parting out? I need a nut that goes on the torsion bar adjustment bolt.

Re: Need Lower Control Arm Shafts - Torsion Bar 1960
 

need both torsion bolts complete will pay fair price and shipping thanks walter.