The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - No SPID on some '67s ?? (https://67-72chevytrucks.com/vboard/showthread.php?t=784458)

weim55

04-02-2019 07:53 PM

No SPID on some '67s ??

My '67 has no SPID on the glovebox door and no sign it ever had one (discolored paint - old glue etc). Did some come without, if so is that just one assembly plant? SPID placed in another spot on the truck other than the glovebox door?

Steve weim55 Colorado

Redneck Rydes

04-02-2019 08:12 PM

Re: No SPID on some '67s ??

I have a 1967 also no spid,and looks like it did not have one either.

jocko

04-02-2019 09:50 PM

Re: No SPID on some '67s ??

It would be an exception to the norm if that happened. SPIDS started in 66, so there "should" be one - but ya never know what crazy antics went on at the factory...

too much stuff

04-02-2019 11:21 PM

Re: No SPID on some '67s ??

I have seen some 67s with no spid, and even a couple of 68s. It is almost hard to find a spid on a 67 gmc.

schwoch1

04-14-2019 11:02 PM

Re: No SPID on some '67s ??

My '67 GMC has no spid either. Looks as if it never had one there either. There is a large sticker that the selling dealer installed there with the salesmans home phone number on it! I am guessing he's not there anymore!

Mike

Bob B.

04-14-2019 11:51 PM

Re: No SPID on some '67s ??

Never seen a SPID on a '67 GMC, but I believe a few did have them.

schwoch1

04-15-2019 12:02 PM

Re: No SPID on some '67s ??

Quote:

Originally Posted by Bob B. (Post 8507267)

Never seen a SPID on a '67 GMC, but I believe a few did have them.

I was really hoping mine did, just for curiosity sake. Plus, some states use the SPID sheet as a second verification of the VIN number. Luckily WI is not one of them states because the VIN ain't even stamped on the frame of my truck.

Mike

dagnabbitt

04-15-2019 02:11 PM

Re: No SPID on some '67s ??

I have two 67 GMCs, both have SPIDs. They are Oshawa trucks.

I suspect that some factories were either slow to move to SPIDs or put them on the inner fender where they would get destroyed or replaced with new inners.

You might get lucky and find one under the seat, I would check. I have never been that lucky, but I hear about guys finding them there all the time.

schwoch1

04-15-2019 03:41 PM

Re: No SPID on some '67s ??

Quote:

Originally Posted by dagnabbitt (Post 8507573)

I have two 67 GMCs, both have SPIDs. They are Oshawa trucks.

Mine is a Fremont truck, and from what I can see it is a VERY early run, the serial number is 1006, and from what I can see the serial numbers started at 1001.

Mike

Eric Johnson

04-15-2019 05:10 PM

Re: No SPID on some '67s ??

3 Attachment(s)

Quote:

Originally Posted by Bob B. (Post 8507267)

Never seen a SPID on a '67 GMC, but I believe a few did have them.

Mine has one. It was a late build in July of '67... I also have the dimple in the frame for the later version power steering (see pic) I have manual steering however...

too much stuff

04-15-2019 07:29 PM

Re: No SPID on some '67s ??

1 Attachment(s)

Quote:

Originally Posted by Eric Johnson (Post 8507671)

Mine has one. It was a late build in July of '67... I also have the dimple in the frame for the later version power steering (see pic) I have manual steering however...

I would say your spid was added later but looks to be correct for the build sheet you have. It is too straight and has the clear film over it which didn't start until about 71 I believe.

Here is an original 67...

All times are GMT -4. The time now is 06:57 AM.