ID these parts?
 

I pulled these off a ways back on my 3100, 57 chevy and now that I'm reassembling, I don't know where they go. I think they go in the engine bay under fenders. Unable to find in parts catalogue. I cleaned them up a little. They are odd shape and have a anchor nut on one end. I appreciate any help.

Re: ID these parts?
 

Those parts go under front fenders towards the front . Inner fender to fender
support.I think the second or third bolt back .No threads in the hole.Pass bolt through fender into your piece then add washer and nut.:gmc2:

Re: ID these parts?
 

Ha ha, we used to throw random parts into our buddies project piles just to screw with them.

Re: ID these parts?
 

An extra ball bearing in the THM400 or 700R4 parts pile after rebuild is good for a headache.

Re: ID these parts?
 

The give away is the slop right and left side :uhmk:

Re: ID these parts?
 

I really appreciate your feedback sack54, I'm still not seeing it.
I have already replaced/repaired all the rusty metal under the headlight and grill area around the radiator/mount. I don't see a place these would go. Any way you or someone can send a picture of area?:flag:

Re: ID these parts?
 

they look like pin style upper shock mounts to me.

Re: ID these parts?
 

Hope this helps 10.0087 is your part. If you need a picture on truck let me know .

Re: ID these parts?
 

Picture of part installed

Re: ID these parts?
 

The Real life photo was very helpful sack54. I found the spot it goes.Thank again.

Re: ID these parts?
 

Front fender/ Someday I might get the picture right side up

Re: ID these parts?
 

Photo helped.
That is one of the places I thought it might go. They are going in this weekend.

Thanks again

:cool:Saltyhog