The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)

- - Swapping PCM (https://67-72chevytrucks.com/vboard/showthread.php?t=786475)

Jake Wade

05-07-2019 09:43 PM

Swapping PCM

I ordered a tuned PCM for my '07 Silverado 1500(Classic) 4WD, 5.3. While it was in transit, I purchased a '06 Silverado 2WD, 5.3.

Will the one I ordered for the '07 Classic work in the '06? I realize I will have to have a crank relearn done since the PCM I ordered is not original to either one of the trucks. I have not yet tried to install it in either one.
Thanks!

izzy_Britton

05-15-2019 11:09 AM

Re: Swapping PCM

yes should work, should not need to relearn anything. plug and play. I have boxes of these and i have swapped them interchangeably 2wd to 4wd and vise versa. I usually make sure that the service numbers on the stickers are the same, but even when they are not, never had any issues.

Jake Wade

05-17-2019 08:31 PM

Re: Swapping PCM

Thanks!

95 S_Trucker

05-18-2019 07:46 AM

Re: Swapping PCM

I know Louisiana has some emissions testing, if you have obd testing, it will fail if the vin in the pcm doesn’t match the vin of the vehicle. You can swap back to the original pcm a week or two before your test. Just something to remember.

All times are GMT -4. The time now is 11:12 AM.