![]() |
'82 Black Chevrolet K-10 Silverado F/S
Selling my project truck, an '82 K-10 LWB w/ 350 4-bbl, TH-700 (rebuilt), 208 (rebuilt), 10-bolts, ran great until a carb fire that scorched the firewall from the center to the A/C box, very saveable, main bulkhead unaffected, another wiring harness (inside cab & out) & heater box/controls included, bedliner, toolbox, good black bench, excellent burgandy headliner, tilt w/ cruise column, good factory black body, etc.
Clean title, $500 Thanks! Doc |
That a very good deal! I'v seen the truck in person, and its for sure worth 500 bucks.
|
PM and E-mail sent
PM and E-mail sent!
BBB:D |
Truck still available.....
|
BTTT....:D
|
chevrolet k-10 for sale
is it a 4x4? or 2x4 either way i'm interested in the truck do you have any pictures if so send them to truckman32@aol.com
|
1 Attachment(s)
Yes, the K-10 is a 4x4...pics on the way.
Doc |
i pm'd you doc
|
1 Attachment(s)
Pic of the firewall after a quickie rust primer/black paint job (too cold to make it pretty).
Fire was concentrated to the carb & A/C box.....removed A/C hardware to clean/paint/repair engine bay. Doc |
1 Attachment(s)
Pic of the rear, some surface rust where the trim was pulled off be P/O..
|
1 Attachment(s)
Nice black seat....
|
1 Attachment(s)
Headliner...
|
thanks doc,let me make some plans for coming to your house if you will pm me your phone number i'll call when is a good time for you
|
not trying to horn in but i will have a good heater bod out of a truck like that if anyone needs it $40 plus the ride for inner and outer heater boxes and all parts with em
|
If this is still here next week, I'm parting her out....got to go!!
Rebuilt 700-R4 w/ 208 (complete) - $300 Nice long bed w/ gate & bedliner - $250 Cab w/ title/doors/harness, etc. - $200 Axles w/ rolling frame, etc. - $100 Tilt column - ??? Dual tanks - ??? Good Black bench seat - ??? Any parts you want, speak up! LOL Thanks! Doc |
Hey, find out some info on the axles and I may be interested in the frame. Also is the power steering pump good? Wiper motor? This is if you part it out anyway. I need a few parts hehe. Wish I could buy the whole damn thing off of ya, I need so many parts!
|
its a shame it would go to parts but how much if i wanted the rear bumper with brackets and the bed?
i may also want the right side tank and parts to convert mine to dual tanks im trying to decide as per my post in 73-87. |
I really want it myself, but I would most likely part it out myself since I need so many parts for my 85 K10. I would probably keep the front fenders and doors for my own truck incase I tore mine up. I may also be interested in the steering box if its not too sloppy. I just need to make a big parts list hehe.
|
hey doc i pm'd you
|
if you end up parting it out, how's the dash pad? what color is it?
|
No dash pad worth mentioning....
Doc |
Truck has sold, cash in hand, title signed....thanks guys!!
Doc |
All times are GMT -4. The time now is 10:29 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com