WTB Cowl panel ends
 

I'm looking for both ends of the cowl panel. I don't need the center grille section, so you'll need to be willing to cut it up. Let me know if you have something. Thanks in advance.

Re: WTB Cowl panel ends
 

I should have one I'll get you a picture Monday.

Re: WTB Cowl panel ends
 

If Dwayne can’t help ya I can.
Posted via Mobile Device

Re: WTB Cowl panel ends
 

I have one I can cut too.

Re: WTB Cowl panel ends
 

And toss me on the list also, looks like plenty of people willing though.

Re: WTB Cowl panel ends
 

Here is mine, only surface rust on the backside. No pitting or eat up edges. Depending on the size of the cuts vs shipping, I’d go $40-$45 at most shipped

Re: WTB Cowl panel ends
 

I'm curious how much the rust around the antenna hole made the metal thinner, if any. I'll need to fill that hole, unless you have one without the antenna hole?

Anyone else have pictures of what they have?

Re: WTB Cowl panel ends
 

Ill get pics of mine tomorrow after work if your still looking..have a few to choose from
Posted via Mobile Device

Re: WTB Cowl panel ends
 

I just bumped my ad to the top in case you're interested... No radio hole.

http://67-72chevytrucks.com/vboard/s...d.php?t=752222

Re: WTB Cowl panel ends
 

Not thinned out at all. The lip could use a very small amount of straightening as it appears someone hit the antenna or overtightenes the mount at one time. Metal isn’t stretched just slightly tweaked

Re: WTB Cowl panel ends
 

I have one that was blasted (crushed glass) and epoxy primed.

Re: WTB Cowl panel ends
 

Have several

$40 each plus shipping will cut where you need


.

Re: WTB Cowl panel ends
 

I'll back out, looks like you will have plenty to choose from. I would have to dig through this.

Re: WTB Cowl panel ends
 

I’m out as well
Posted via Mobile Device

Re: WTB Cowl panel ends
 

Thanks everyone. You've all proven why this forum is great! Found one I was after, so thanks!

Re: WTB Cowl panel ends
 

Congrats! I hope it works for you.

Be mindful of these things....a forum member (and good guy) gave me a nice-looking cowl that looked good but when media blasted, large holes appeared. He warned me that was possible, clearly the paint was all that was holding it together.

I'd check fit first (if you have a complete one) before getting it painted. I had a NOS fender painted and it doesn't seem to want to mate up right. Maybe it is a little "off" in dimensions.