The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - MO Drive shaft needed (https://67-72chevytrucks.com/vboard/showthread.php?t=789322)

Aaron Burkemper

06-27-2019 09:43 AM

Drive shaft needed

I need a the rear drive shaft for a two piece setup. It's on a 71 C20, four speed.

Shipping to St. Louis area or close enough for pickup.

Thank you!

Tripmiester

06-29-2019 07:17 PM

Re: Drive shaft needed

I have a complete driveshaft of a 71 GMC 4 speed would like to sell the complete assembly though.....

Steve

Aaron Burkemper

06-29-2019 09:04 PM

Re: Drive shaft needed

I am not opposed to that. Let me know what you want and how to get it to 63348, if you are not within a reasonable distance.

SmirchIs#1

07-01-2019 09:56 AM

Re: Drive shaft needed

Quote:

Originally Posted by Aaron Burkemper (Post 8549294)

I need a the rear drive shaft for a two piece setup. It's on a 71 C20, four speed.

Shipping to St. Louis area or close enough for pickup.

Thank you!

I have several drive shafts out of these trucks,but they are not labeled.If I had a measurement to work with I would look for one

Aaron Burkemper

07-03-2019 09:55 AM

Re: Drive shaft needed

The one that is broken is 31 inches center to center to the yokes. It had been cut down, so I would figure about 32 1/2 center to center. It does have the larger u-joint with the 1 3/16 cups.

All times are GMT -4. The time now is 03:17 AM.