The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   Someone Asked About A Heater Part (https://67-72chevytrucks.com/vboard/showthread.php?t=78955)

old Rusty C10 11-30-2003 06:50 PM

Someone Asked About A Heater Part
 
sOMEONE ASKED ME ABOUT A HEATER PART THEY NEEDED SOME KIND OF ADJUSTMENT ROD OR SOMEHTING AND I COULDNT FIND YOUR THREAD I TOOK MY CAB OFF THE FRAME TODAY AND AM READY TO PULL THE PIECE IF YA STILL WANT IT PLEASE CONTACT ME SO I CAN GET THIS READY TO SHIP THANKS

TwinTurbo 11-30-2003 07:45 PM

That would be me, the part I need is the white plastic thingie on the rod in this pic:

http://67-72chevytrucks.com/vboard/a...&postid=449024

old Rusty C10 11-30-2003 08:03 PM

this is on the heater box? or on the heater switch?

old Rusty C10 11-30-2003 08:04 PM

also please if ya can circle it cause lol i wanna make sure i send ya the right thing

TwinTurbo 11-30-2003 08:20 PM

This is it:
http://www.crossfire.homeip.net/twin...okenpiece2.jpg

old Rusty C10 11-30-2003 10:28 PM

i dont see this on my heater box now my truck is a 76 and it had no air conditioning if you want i can drop the heater core out of it and send ya the whole heater box

Destructo 12-01-2003 12:40 AM

I need one of the doors for mine. But since yours didn't have A/C I don't know if yours will have these door or not. Its like a box type door, its the biggest door in an A/C equipped truck and has two basically square channels through the middle with one divider in between the two channels. I believe it switches from vent air to heat air, so yours may have it. If you don't know what i'm talking about i'll put up a pic. It also has a rod that goes through it for it to swing on, I need that as well. Mine was rusted when I pulled it out and the rust got it hung up on the plastic and I pulled too hard and broke the plastic on the door.

old Rusty C10 12-03-2003 09:44 PM

twin i just found out i need to swap the heater boxes from the 81 and 76 so let me see what i find when i pull the heater box out of the truck to stick in the other one. If i find that connector ya need its yours
Destructo once i pull down the box and if the parts are there that twin turbo needs ill consider scrapping the box if the doors will match the one you need ill get ya those parts too

TwinTurbo 12-03-2003 09:47 PM

Hey cool, I only need that one tiny part :)

old Rusty C10 12-06-2003 02:23 PM

im under a foot of snow with that project give me a c ouple of days til i can get out there to see if i have your part on the later model heater box im told theyre different from 81-87 as opposed to 73-87 by someone who seems to know more about these trucks than the factory ( thanks Chris youve been a lifesaver!)


All times are GMT -4. The time now is 07:56 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com