The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Side step ideas (https://67-72chevytrucks.com/vboard/showthread.php?t=789704)

Kcorey 07-04-2019 02:09 PM

Side step ideas
 
1 Attachment(s)
Hello all. Looking for ideas for side steps for my 72 cheyenne super . I’m going to most likely build myself unless I can find a set that matches the old school look. Post what you have done , and here’s my super !

flashed 07-04-2019 02:41 PM

Re: Side step ideas
 
I have a pair on my 72 Highlander Truck I will give you if its the look you are after . Search for the 1972 Highlander I posted here about and you can see them .

special-K 07-04-2019 04:42 PM

Re: Side step ideas
 
I made a pair from diamond plate and 1 1/4" square tube for a truck, no pictures. The tune went to the frame with flanges to bolt through. I had them up snug to the rockers and only stuck out enough to get the front of the boot on. No splash guards at the wheel opening, but they serves to keep splash off the side of the truck pretty well. They looked like rub rails you see on rock crawlers. For that truck I did gun metal metallic/clear powder coat to match other steel work on the truck. I guess you could do it with aluminum, but I wanted more rugged one that wouldn't get bent up


All times are GMT -4. The time now is 05:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com