The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)

- - Double wall patch piece (https://67-72chevytrucks.com/vboard/showthread.php?t=790871)

Double wall patch piece

Hey guys I’m looking for a 20”x20” piece for the inside ceiling of a double wall top. I found a junker top that I am converting into a no sides top. PO cut a vent into it and I need to patch it. Not to worried about the outside piece but the inside has the grooves in it and will be much harder to match. Looking for someone that has a junker top and willing to send me a piece. Any help would be appreciated.
Thx
Mike

Re: Double wall patch piece

Quote:

Originally Posted by Stokester (Post 8565411)

Just make one. Since you already have the top, make a plug from a good section with fiberglass, bondo or anything else. You can then replicate the part you need to fix the vent hole.

Re: Double wall patch piece

That is plan b. Figured someone had a junker top laying around. Maybe not!! Working on the frame now. I probably have another week or two before I start the glass work.