The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)
-   -   1988-93 seats (https://67-72chevytrucks.com/vboard/showthread.php?t=791620)

oliver63 08-09-2019 08:53 PM

1988-93 seats
 
I was wanting to have me seat redone. I was told today the 1988-93 seats can't be recovered. What have some of you run into and done?

95 S_Trucker 08-09-2019 10:37 PM

Re: 1988-93 seats
 
88-94 seats can be covered. You can buy upholstery from stockinteriors.com. The 95+ trucks have the fabric glued to the foam.

oliver63 08-10-2019 08:25 AM

Re: 1988-93 seats
 
Quote:

Originally Posted by 95 S_Trucker (Post 8573588)
88-94 seats can be covered. You can buy upholstery from stockinteriors.com. The 95+ trucks have the fabric glued to the foam.

took it to a trim shop yesterday...he told me the opposite...the 88-93 were glued to the foam...I'll see if I can get the upholstery off...

95 S_Trucker 08-11-2019 09:20 AM

Re: 1988-93 seats
 
I’m gonna try to post a link for 88-94 upholstery.

https://www.stockinteriors.com/Items...ilterYear=1990

Stormin08 08-12-2019 10:19 PM

Re: 1988-93 seats
 
1 Attachment(s)
mine have been recovered, using the stock foam.

TKCR 08-21-2019 10:00 PM

Re: 1988-93 seats
 
Quote:

Originally Posted by oliver63 (Post 8573712)
took it to a trim shop yesterday...he told me the opposite...the 88-93 were glued to the foam...I'll see if I can get the upholstery off...

Those seats covers are heat laminated to the foam. Stock Interiors do have the replacement covers, but this is what it says about the covers:

The 1988 and newer models have some of the original seat upholstery heat laminated to the foam making it very difficult to remove the old upholstery. Our seat kits for these models do not require the removal of this laminated upholstery. Our sets will go right over the original and hog ring where the original seat cover is attached.
Hope this helps

Stormin08 08-22-2019 01:19 PM

Re: 1988-93 seats
 
your going to make me remove mine and check...i have never liked my seat.
ever since being redone, you now sit closer and higher to the wheel...i always thought it need more foam trimmed, but it may have the original cover under there. i have never looked.


All times are GMT -4. The time now is 05:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com