72 K5 Body n Frame Cuts
 

Firewall windshield frame - fair condition, non AC $400

Drivers side b-piller also ava with firewall, $600....

Misc body and frame cuts quoted as needed, LMK needs....

Re: 72 K5 Body n Frame Cuts
 

Any available brake fuel line clamps clips, ground straps, and harness clips?

Re: 72 K5 Body n Frame Cuts
 

How about the passenger bedside taillight cut like the driver side I have? And also 1 rear shock bracket?

Re: 72 K5 Body n Frame Cuts
 

I will take firewall windshield frame as pictured, pending more pictures showing condition, especially windshield frame; and shipping by Fastenal ( I pay Fastenal).

Les

Re: 72 K5 Body n Frame Cuts
 

Also interested in gas tank and sending unit wire, pending close up picture on tank inlet pipe.

Les

Re: 72 K5 Body n Frame Cuts
 

I am going to pass at this time on above parts.

Thanks,
Les

Re: 72 K5 Body n Frame Cuts
 

I need one of these please

Re: 72 K5 Body n Frame Cuts
 

what would shipping be on the firewall/windshield frame to 50701?

I haven't ventured into the large part market yet... :)

Thanks!

Paul

Re: 72 K5 Body n Frame Cuts
 

I need Drivers quarter if decent shape specifically these sections. Also Passenger side right behind door in same place driver's side photo if it's good condition.

Thanks, Mike

Re: 72 K5 Body n Frame Cuts
 

would be interested in front 6" of passanger front frame horn, driver side rear tail light cutout to marker light area (top seal area condition unimportant) and the fuel tank inlet if you want to cut it off.
Thanks David

Re: 72 K5 Body n Frame Cuts
 

Is the rear cross member available?

Re: 72 K5 Body n Frame Cuts
 

Prefer local on this one....

Both areas are junk, sry

Should be able to salvage them, I will take another look for you.

Rotted, sry

Re: 72 K5 Body n Frame Cuts
 

no worries!

thanks,

Paul

Re: 72 K5 Body n Frame Cuts
 

Assuming it got missed because of how long ago it was. A good rear shock bracket?

Re: 72 K5 Body n Frame Cuts
 

How much do you want for the rear frame horns?

Re: 72 K5 Body n Frame Cuts
 

Do you have one of those triangular shaped pieces at the front of the cab that I sent a picture of? I know it was poor photography...

Re: 72 K5 Body n Frame Cuts
 

I could use a section of cargo bed, 8" by 20", long side is left to right with no holes.

Re: 72 K5 Body n Frame Cuts
 

Is there any chance that you have one of these, It is the inside fwd cab to fender brace or doubler? I dont know but it is held on by the 2 fwd bolts on the fwd cab mount. I can make one but... Please let me know.
Mark

Re: 72 K5 Body n Frame Cuts
 

Do you have the power steering box stiffener that sits on the inside of the frame rail? If so shipping to 28034. Should fit in flat rate box.

Re: 72 K5 Body n Frame Cuts
 

Do you have additional pics of firewall/windshield frame??