The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Wheel stud replacement question (https://67-72chevytrucks.com/vboard/showthread.php?t=792419)

NewToThis66 08-25-2019 02:24 PM

Wheel stud replacement question
 
I am replacing the wheel studs on my 66 GMC so i can add wheel spacers for my new rims to fit. Is there somewhere that has a comprehensive chart of wheel studs?
I pulled one of my current studs and measured it:
Under head length - 1.3 (new ones need to be 1.8)
Knurl Diameter - .554
Shoulder length - .46
Thread is 7/16 - 20 currently (would like to stay the same if at all possible

For my new ones i can cut them down to match the 1.8 that i need.

The closest thing i can find to what i need is the Moroso #46160 but the Shoulder length seems to be significantly shorter than my current ones. Does this matter?

Wrenchbender Ret 08-25-2019 02:57 PM

Re: Wheel stud replacement question
 
Dorman parts is the supplier of these parts. Most parts stores have size catalogs but you might find it on the web.
George

vince1 08-25-2019 09:06 PM

Re: Wheel stud replacement question
 
https://static.dormanproducts.com/do...attributes.pdf

GMDad 08-26-2019 07:41 AM

Re: Wheel stud replacement question
 
Check a mid 60's Corvette. We used to sell a lot of these at the dealership for guys putting mags on their cars but can't remember if they are 1/2" longer or not


All times are GMT -4. The time now is 05:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com