The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Hub Bore for 65 C10 (https://67-72chevytrucks.com/vboard/showthread.php?t=792466)

Treybizttu

08-26-2019 11:01 AM

Hub Bore for 65 C10

Does anyone know what the hub bore needs to be for stock sized six lug drums on my 65 (front and rear) ? My truck is about 2 hours away so I can't measure myself until I run down this weekend. It's sitting in the barn with 4 flats so I'd like to get the aluminum wheels I've got ready to go since I've got a fresh set of tires for those.

Thanks!

SkinnyG

08-26-2019 11:45 AM

Re: Hub Bore for 65 C10

2wd 5-bolt should be 78.3mm.

This thread suggests a fart over 3.5", which sounds aboot right.

Rock Auto says the hole in the brake drum is 3.57"

Rock Auto is a wealth of information when you need it.

Treybizttu

08-26-2019 01:11 PM

Re: Hub Bore for 65 C10

Awesome thank you.

cj847

08-26-2019 07:45 PM

Re: Hub Bore for 65 C10

Had a spare drum in my garage. 3.57" is correct.

All times are GMT -4. The time now is 04:58 AM.