The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevy/GMC Suburbans & Panels Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=38)

- - k10 Dana 44 hub size (https://67-72chevytrucks.com/vboard/showthread.php?t=794560)

adzints7

10-06-2019 08:41 PM

k10 Dana 44 hub size

2 Attachment(s)

I have read that the common hub diameter is 78.3 for my year suburban, 1972 k10. I am measuring it with a digital caliper at 89.01. I cannot find any reference to a hub diameter with that sizing....confirmed that I have a correctly calibrated caliper. I have been googling and coming up with nothing. Am I measuring wrong? Is not a GM Dana 44 or is it a 10 bolt?

Bigdav160

10-07-2019 10:34 AM

Re: k10 Dana 44 hub size

Looks like a Dana. Is the measurement suppose to be the inside of the rotor hub? Or perhaps the pressed edge of the hub selector?

adzints7

10-07-2019 10:42 AM

Re: k10 Dana 44 hub size

I’m not entirely sure. I’m specifically looking at wheel fitment at this point but will be going through and rebuilding the front and rear over time so I’ll need to know for parts. It’s definitely a Dana 44: stamped with 44-5f on the webbing.

Blazerowner

10-07-2019 11:25 AM

Re: k10 Dana 44 hub size

Mine are 3.5”. Roughly 89mm.

adzints7

10-08-2019 11:48 AM

Re: k10 Dana 44 hub size

ok, thanks Blazerowner.

All times are GMT -4. The time now is 07:53 AM.