The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   68 project truck (https://67-72chevytrucks.com/vboard/showthread.php?t=794828)

Mw548 10-12-2019 01:18 PM

68 project truck
 
1 Attachment(s)
Just purchased a 68 project truck that needs everything. A couple weeks ago am going to try my first ls swap into this thing.

Mw548 10-12-2019 01:27 PM

Re: 68 project truck
 
1 Attachment(s)
Brought ls home

LockDoc 10-12-2019 05:17 PM

Re: 68 project truck
 
-
Looks like a good project. You will like the LS.

There is an LS Swap forum on here too so check it out.

http://67-72chevytrucks.com/vboard/f...prune=-1&f=206

I moved your thread to the 67-72 pickups forum....

LockDoc

Mw548 09-05-2020 08:57 PM

Re: 68 project truck
 
5 Attachment(s)
Pictures of progress

Mw548 09-05-2020 09:01 PM

Re: 68 project truck
 
1 Attachment(s)
5.3 installed

fourspeedwagon 09-05-2020 09:11 PM

Re: 68 project truck
 
Very good MW
Got any info on your swap that you would share?
Looks like I see an automatic dipstick so I’m guessing you’re using a 4l60e. What are you using for your fuel system - pump, tank etc. ?
Looks like fun, glad to see you making progress.

I just bought an ‘05 pickup that was rear ended so I can use the Ls and trans to put in my ‘68 c10 suburban.

Mw548 09-05-2020 09:16 PM

Re: 68 project truck
 
I had the guy throw in the factory tank from the Silverado the 5.3 came out of gonna see if i can make it work otherwise I’m sure I’ll get a fuel cell installed i plan on lowering the truck quite a bit so we will see i shortened it from long bed to short and pretty much threw away all the tin the box was so rusted out and previously hacked patches in so I’m gonna start with new repop. I do plan on using a complete stand alone 5.3 fuel system just not sure where to go. Guy who lives by me used the Holley terminator x? Or something along those lines and loved it. Any suggestions.

Roostre 09-05-2020 09:26 PM

Re: 68 project truck
 
I had to look twice. I saw a truck that looks almost identical to that on Craigslist up in Jordan, I think that one is a 67 though. I was looking pretty hard at the guy's posting because he has a long step bed that would look great on my c20.

gmc684x4 09-05-2020 09:27 PM

Re: 68 project truck
 
Nice start

Mw548 09-05-2020 09:52 PM

Re: 68 project truck
 
2 Attachment(s)
Fit new floor

fourspeedwagon 09-05-2020 11:17 PM

Re: 68 project truck
 
Excellent. I’ve been wondering about whether the factory/late model fuel tank would work. I’m yet to pull the bed off my donor to see what it looks like- if you weren’t planning on going super low do you think it’d work?

Mw548 09-05-2020 11:32 PM

Re: 68 project truck
 
I’m not sure it’s pretty big I’m gonna have to keep ya updated.


All times are GMT -4. The time now is 03:37 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com