Need a stock spindle 1968 C10 pickup
 

Hi guys. I'm in search of a drivers side stock drum brake type spindle. You'd think with everyone doing disk brake conversions and drop spindles there'd be a ton of stock one's laying around.
Any leads? I'm even having trouble finding anything new.
Thanks,
Steve

Re: Need a stock spindle 1968 C10 pickup
 

I've got a set off one of my 67's if that works for you ? I can get a pic tomorrow . I can list them on the parts board . :chevy:

Re: Need a stock spindle 1968 C10 pickup
 

Greens Restoration in Cameron, TX. He's close to you and I would be shocked if he didn't have one.

As a matter of fact, I bought drivers side upper and lower control arms from him and he left the spindle attached...so I know he has others. That would mean I have 3 drivers spindles but I'm in Dallas.

Re: Need a stock spindle 1968 C10 pickup
 

Thank you for the responses! I am waiting for a response from a guy here on craigslist Austin.
If he doesn't come through, I'll definitely try the guys in Cameron.(sounds like a fun little road trip)
Grumpy old man- Thank you. I hope to find it closer, but if i can't i'd try to make it worth it to you for the trouble of sending it.

Re: Need a stock spindle 1968 C10 pickup
 

I have the set I pulled off my 69. Let me know if you are interested I will bring back from farm next weekend. Trade for a 6 pack of some local favorite!

Re: Need a stock spindle 1968 C10 pickup
 

Please don't turn the OP's thread into a want to buy thread. Want to buy threads are for subscribing members. Asking for tips on where to locate a service or resource is ok.

Re: Need a stock spindle 1968 C10 pickup
 

Thanks Mike! I just picked up one from Greens in Cameron. Those guys have a lot of parts!
Hopefully today i'm going to get it back on the road. But know anybody around Austin who wants to freshen up the front end? I think i'll order a tie rod and ball joint kit and get it installed.
I think I talked to the guys at Speedy Align a while back. They might want to do it, but looking for recommendations too.
Thanks again!

Re: Need a stock spindle 1968 C10 pickup
 

It fought me all the way getting it all apart. seized brake lines, spinning control arm bolt, etc. But went back together no prob! thanks everybody!!

Re: Need a stock spindle 1968 C10 pickup
 

:chevy:I moved your inquiry over to the parts forum for your quest. Good luck on your search

Re: Need a stock spindle 1968 C10 pickup
 

Not sure how this is a want to buy issue? He asked for a part, some members said they might have them. Isn't that what this is supposed to be about? People helping other members? Or am I missing something. Nobody offered to sell anything, only a trade for a six pack of beer. Hell, I would take a six pack of beer for damn near my son's whole truck. LOL.

Be safe all.

RR