The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988-1998 GMT400 Chevy & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=11)
-   -   Wanted: Half shaft (https://67-72chevytrucks.com/vboard/showthread.php?t=80121)

mach158 12-08-2003 02:58 AM

Wanted: Half shaft
 
I'm looking for a half shaft for a 89 chevy silverado 1500 4x4. Need it NOW but not looking to spend a fortune. I know i can get one for $70 new but i can't afford that i need one cheap as i ended up with the wrong one and i'm pretty much broke. Hoping someone has something i can use.

mach158 12-18-2003 02:57 AM

Anybody? If ya don't have one could you look around in the junkyards for me please? I need one and i can't quite afford the new one, teen on a budget sucks. Not looking for anykid of handout but something cheap.

mach158 12-22-2003 12:28 AM

Gonna try one last time.

rockcrawler 12-22-2003 05:28 PM

if they are the same for a gmc 2500, I have two, what do you want to spend, where are you located?

mach158 12-22-2003 07:18 PM

I sent you an e-mail.

mach158 12-25-2003 10:15 PM

rockcrawler, did you get my e-mail?

mach158 12-31-2003 11:52 PM

TTT

rockcrawler - did you get the e-mail i sent you?

mach158 01-20-2004 07:08 PM

Are these things rare or just no one has any? I have had a few people say they had one but then never hear back from them.

So if you have one that will work for a 1989 Chevy k1500 please reply or e-mail me.

beamers69 01-20-2004 09:47 PM

1 Attachment(s)
I might have one, got a totaled 92 Z71, which
shaft is it?

mach158 01-20-2004 09:52 PM

I need the drivers side half shaft. How much are you looking to get for it? Also could i get some measurements? Like distance between the rubber boots on the shaft and total length? Just wanna make sure it will work.

beamers69 01-23-2004 09:17 AM

1 Attachment(s)
Didn't see any rubber boots, distance from u-joint to u-joint
is 31 1/2 inches. Here's a Pic. If the rain holds off I plan to
take it off this weekend, clean it up put on a coat of paint
and post on EBAY.

mach158 01-23-2004 05:05 PM

That is the front driveshaft. I need the drive front axle. Connects front differential to the tire.

beamers69 01-24-2004 06:52 AM

Woe is me....when u said shaft thats what I
thought you were a looking for. No wonder
I didnt see any rubber. I do believe I know
what you are talking about now will get
measurements and email you when the sun
comes up.
Thanks
Don

99-2door 02-02-2004 08:03 AM

Quote:

Originally posted by mach158
Are these things rare or just no one has any? I have had a few people say they had one but then never hear back from them.

So if you have one that will work for a 1989 Chevy k1500 please reply or e-mail me.

I think it is just that you already said you don't want to spend $70. After you pay $25 + to have the thing shipped, nobody want to go to the trouble and sell a part for dirt.

mach158 02-02-2004 03:41 PM

I can understand that, plus i been without one for so long i will be getting my taxes shortly so i will be able to get a new one.


All times are GMT -4. The time now is 03:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com