The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Speaker Wires and Speaker Placemnet (https://67-72chevytrucks.com/vboard/showthread.php?t=802560)

TDH1989

03-11-2020 10:31 PM

Speaker Wires and Speaker Placemnet

I'm adding a stereo system to my 67 C10. Right now it has no wiring whatsoever but PO has cut out 6x9 holes in the doors. Can you guys possibly post some threads on guys who have added systems and how they set them up. Ex. How they drilled through the doors to run their speakers and speaker wires. Pictures would help of your set up if no threads.

Thanks

Metaldoc

03-12-2020 03:55 AM

Re: Speaker Wires and Speaker Placemnet

4 Attachment(s)

These might help ya, measured from the hinge.

TDH1989

03-12-2020 09:17 AM

Re: Speaker Wires and Speaker Placemnet

Quote:

Originally Posted by Metaldoc (Post 8693290)

These might help ya, measured from the hinge.

Thanks man. This helps out a lot

Mike C

03-13-2020 07:40 AM

Re: Speaker Wires and Speaker Placemnet

I drilled the door and the cab pillar offset. Cab pillar just below the courtesy switch and put a grommet in hole. Door about 4-5” lower than that with grommet. Offsetting the wire like that lets it lay flat between door and cab when you close the door.

Here is a link to the install I did on my ‘69.
http://67-72chevytrucks.com/vboard/s...d.php?t=659786

All times are GMT -4. The time now is 10:17 PM.