|
My engine bay main wires from battery
2 Attachment(s)
I thought I would share how I did the main wiring in my engine bay. I had a 2008 Silverado donor to pull from and got both battery cables, starter alternator wires and mega fuse with cover. The nice thing was I was able to use the cables in stock length and use the nice factory crimped ends. I mounted the mega fuse on the inner fender under the battery tray. The alternator wire was just the right length. The battery ground cable has a second long wire that reached all the way to the firewall. I ran two wires from the mega fuse under the rad to the drivers side to feed the LS harness and the trucks fuse box. The group 47 battery has sunken areas around the posts and fits the cables like the stock Silverado.
|
Re: My engine bay main wires from battery
2 Attachment(s)
mega fuse. PCM
|
Re: My engine bay main wires from battery
3 Attachment(s)
sorry mate the vertigo was killing me, this happened to me at first too, the iPhone does crazy stuff with the pics, I use a program called IrfanView to rotate them, it's a free download
very clean build, and I love the top mount terminals and can't stand the GM side terminals, all they do is strip |
Re: My engine bay main wires from battery
Thanks Gregski! I'm going to download that program to my pc. I used Paint before but this pc has Paint 3D and I can't figure out how to invert on that program.
|
| All times are GMT -4. The time now is 05:33 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com