The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Windshield frame repair panel (https://67-72chevytrucks.com/vboard/showthread.php?t=803051)

8ballautomotive

03-22-2020 02:49 AM

Windshield frame repair panel

Does anyone know if new windshield frame repair panels exist and if so where I could get one? I have searched google but can't find anything.

The frame behind where the windshield rubber sits is rotten (only along the bottom edge) so I guess I am going to have to cut and bend some repair patches from sheet metal. If a repair panel exists that would save me a lot of time.

Thanks

Ziegelsteinfaust

03-22-2020 10:56 AM

Re: Windshield frame repair panel

I ran into a similar problem, and had to go to the jy to cut out what I needed.

Pontiac1976

03-22-2020 11:45 AM

Re: Windshield frame repair panel

I agree batt ripe saw junk yard cut all the way throw the double metal bends.

Quote:

I ran into a similar problem, and had to go to the jy to cut out what I needed.

You get home cut drill out spot welds fit in your area's are bad weld in.
No there is no panel in that area you have to do like said.

All times are GMT -4. The time now is 07:00 PM.