The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 1966 GMC 305V6 To 350 (https://67-72chevytrucks.com/vboard/showthread.php?t=803472)

1971 GMC SHORTY

03-30-2020 11:24 PM

1966 GMC 305V6 To 350

Trucks A 1966 GMC 4x4 3/4 ton Im putting A V8 in, All I Would Need To swap clutch Flywheel Bell housing To Swap SBC 350 Engine Using Original 4 transmission and Divorced Transfer case, Engine Mounts , trying to get All Parts Ready Beforehand Thanks

Captainfab

03-31-2020 09:27 PM

Re: 1966 GMC 305V6 To 350

Are you looking for a bellhousing and flywheel for your small block? If so I have those, but shipping to CA will not be cheap.

raylube

03-31-2020 11:33 PM

Re: 1966 GMC 305V6 To 350

Please offer up any 305 v6 parts on the classified section of this forum

sstock

04-01-2020 12:50 AM

Re: 1966 GMC 305V6 To 350

Yes, I could use a dent free oil pan

All times are GMT -4. The time now is 07:54 PM.