The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - GM throttle stud (https://67-72chevytrucks.com/vboard/showthread.php?t=804186)

liftlawssuck

04-11-2020 04:31 PM

GM throttle stud

OK hopefully someone has been down this road before. I am looking for a throttle bushing and stud that will fit the larger .500" hole in a Holley throttle bracket. I have a throttle stud from Holley that has the 7/32" stud and 1/4-28 thread. I found a bushing that one side is threaded but for 1/4-20. I can't find a stud with a 1/4-20 thread. Does anyone know of any that will fit?

Thanks

Pontiac1976

04-14-2020 05:49 PM

Re: GM throttle stud

Holley does sell studs for there carbs on there site. But if you want to make your own 1/4"by 20 thread rod from hard ware store cut to size.

MikeB

04-14-2020 06:37 PM

Re: GM throttle stud

Picture? I have lots of throttle studs in a parts drawer, one of which might work.

All times are GMT -4. The time now is 04:40 PM.