The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - PS bracket (https://67-72chevytrucks.com/vboard/showthread.php?t=805058)

rod1701

04-25-2020 12:07 AM

PS bracket

1 Attachment(s)

Where can I get one of these?

Part number?

Off 67-72 or 73-87?

Pontiac1976

04-25-2020 12:11 AM

Re: PS bracket

look like 73-87 try rockauto,LMC,CLASSICPARTS

rod1701

04-25-2020 12:35 AM

Quote:

Originally Posted by Pontiac1976 (Post 8724944)

look like 73-87 try rockauto,LMC,CLASSICPARTS

Started there. No suck luck. Only found a couple of Google images. Nothing in any diagrams or part numbers.
Posted via Mobile Device

Pontiac1976

04-25-2020 08:58 AM

Re: PS bracket

#25 The front bracket S/P mounting is 73-78- C,K 350.
The rear bracket S/P support ASM ADJ is 73-78 C,K,P 350.<(This one not the most command used.)
would need more info: what it came in, what option on motor for belts run.
Then lots of Part # them to pick and that still hit miss un till can cross off a few.
This is just one book for 73-78 truck I checked. Group 6.606

Rickysnickers

04-25-2020 10:51 AM

Re: PS bracket

Try Fred, specialty retail, here on the board. He sells lots of stuff

rod1701

04-25-2020 09:37 PM

3 Attachment(s)

Quote:

Originally Posted by Rickysnickers (Post 8725108)

Try Fred, specialty retail, here on the board. He sells lots of stuff

I think that part would’ve perfect for what I am working on but improvised with old parts. Weak link seems to be the one bolt that that is mounting everything to the manifold. Seem strong enough. We’ll see when I drive a little.
Posted via Mobile Device

Pontiac1976

04-26-2020 08:11 PM

Re: PS bracket

If it work. But looking at your bracket it not the right one for the ex-manifold I think the one in the center works them.http://www.2040-parts.com/70-76-chev...elle-i2040599/

rod1701

04-26-2020 10:29 PM

Re: PS bracket

Thanks. Like I said not happy with it but going to see if holds while keeping my eyes open at the local pick-a-part yards.

Tryouts g to get it back to pretty close to correct for the period. Seems like previous owners kept it up pretty good but maybe improvised with salvage yard parts available. Finding a few Impala and Chevelle pieces as well as 81-87 parts.

Going for a survivor/patina truck so definitely like used OEM stuff.

So far just under $300 under tff grr e hood with a few brackets, maintenance items, hoses, spray paint, plus gobs of carb cleaner/oven cleaner/degreaser, and tons of elbow grease.

Greasey Harley

04-27-2020 01:19 AM

Re: PS bracket

I used an Alan Grove 400L in my 68' with a 327 and short water pump. I am quite happy with the quality and fit.
http://www.alangrovecomponents.com/S...Short_Pump.htm
Yours probably needs the bracket for the long water pump.
402L :
http://www.alangrovecomponents.com/S..._Long_Pump.htm
http://www.alangrovecomponents.com/i...Large/402L.jpg

All times are GMT -4. The time now is 06:31 PM.