Transfer case ID help
 

Swapping transfer cases and noticed the difference between the two. The one on the right came from my running donor ls/th350 combo. Don't know what the additional attachment on it is for. The one on the left came from the parts vehicle and I'm pretty sure it's a 205. Should I go with the running donor and the unknown transfer or swap

Re: Transfer case ID help
 

My guess is aa PTO unit, 205, what does the front of it look like, maybe a drive shaft knuckle?

Re: Transfer case ID help
 

Having problems with photos but it does have a shaft with a keyway slot so I'm thinking PTO also. Any value to this or just extra weight if not used

Re: Transfer case ID help
 

Looks like PTO unit. See thread here: http://67-72chevytrucks.com/vboard/s...d.php?t=280068

Re: Transfer case ID help
 

If you want to get rid of it I may be interested, just another cool add on. lmk

Re: Transfer case ID help
 

Both cases are NP205's. The one on the right has a PTO on it, chances are it was used to run a winch or hydraulic pump. They're more common to have mounted to a manual transmission but since a TH350 doesn't have a provision for a PTO they used the T-case.

Re: Transfer case ID help
 

Can I just remove it and plate it off or do I have to do something else

Re: Transfer case ID help
 

Just take it off and put a cover back on it. Good chance to take a peek at the gears and other internals too.

Re: Transfer case ID help
 

Yup, take it off along with the studs and use the plate from the other case to plug the hole. Looks like you may have it sold already...if not I'll buy it from you.

Re: Transfer case ID help
 

Thanks for the input guys I think I'll put in the non pto unit in and probably sell the other one. Going to be a couple of weeks till I do it and I'll contact the people who showed interest in order of contact. Thanks again love the great help out there!