The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Smooth Firewall Fusebox Mount? (https://67-72chevytrucks.com/vboard/showthread.php?t=805332)

Dodge68charger 04-29-2020 01:26 AM

Smooth Firewall Fusebox Mount?
 
How Did You Guys Go About Mounting The Fuse Box To The Firewall n Routing The Wires?

Thanks Guys
Posted via Mobile Device

1971Stepside 04-29-2020 10:48 AM

Re: Smooth Firewall Fusebox Mount?
 
1 Attachment(s)
I did two things. I made a piece that welded in my drivers side vent that will allow me to bolt the bulkhead of the wiring harness into it and run all the wiring out of the cab and up into the fender. I don't have a pic of that, but I also put this panel in on the backside of the firewall to allow me to mount my gauge wiring and other necessary items.


All times are GMT -4. The time now is 12:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com