The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - 66 c10 with Vacuum Gauge (https://67-72chevytrucks.com/vboard/showthread.php?t=805588)

Afirehawk1

05-03-2020 06:53 AM

66 c10 with Vacuum Gauge

I added a vacuum gauge to the instrument cluster.
Where is the best location to connect?

The Rocknrod

05-03-2020 07:23 AM

Re: 66 c10 with Vacuum Gauge

Here's a good thread on that - http://67-72chevytrucks.com/vboard/s...d.php?t=581178

Afirehawk1

05-04-2020 06:29 AM

Re: 66 c10 with Vacuum Gauge

Quote:

Originally Posted by The Rocknrod (Post 8731100)

Here's a good thread on that - http://67-72chevytrucks.com/vboard/s...d.php?t=581178

Ok so what i am reading tie it into the pcv line between the carb and master booster? The vacuum fitting is really small

LT1 Burb

05-04-2020 08:15 AM

Re: 66 c10 with Vacuum Gauge

Quote:

Originally Posted by Afirehawk1 (Post 8731784)

Ok so what i am reading tie it into the pcv line between the carb and master booster? The vacuum fitting is really small

I will get you a picture tonight where mine is.

Afirehawk1

05-04-2020 08:19 AM

Re: 66 c10 with Vacuum Gauge

Quote:

Originally Posted by LT1 Burb (Post 8731813)

I will get you a picture tonight where mine is.

Thank you

Afirehawk1

05-04-2020 08:32 AM

Re: 66 c10 with Vacuum Gauge

Quote:

Originally Posted by Afirehawk1 (Post 8731816)

Thank you

this may help.

I am running a 66 BBC 396 engine with a Holley 750 carb. i based it on the 66 Chevelle. so the PCV line runs between the front of the carb to the Master Booster.

i do see a hose fitting under the MSD Billet Distributor. i dont remember the valve under underneath whats its called. Vacuum Advanced Canister maybe???

LT1 Burb

05-05-2020 07:09 AM

Re: 66 c10 with Vacuum Gauge

Mine is plugged into a port on the Carb

Afirehawk1

05-17-2020 03:48 PM

Re: 66 c10 with Vacuum Gauge

Quote:

Originally Posted by Afirehawk1 (Post 8731822)

Any idea size/diameter of the vacuum hose?

Lokin4AReason

05-20-2020 02:50 AM

Re: 66 c10 with Vacuum Gauge

Any foto(s) of this ?

Afirehawk1

05-20-2020 08:41 AM

Re: 66 c10 with Vacuum Gauge

1 Attachment(s)

Quote:

Originally Posted by Lokin4AReason (Post 8742930)

Any foto(s) of this ?

I am using a factory gauge if that helps

Lokin4AReason

06-13-2020 11:58 AM

Re: 66 c10 with Vacuum Gauge

Nice . . . . Been looking for one of those for a bit now .

All times are GMT -4. The time now is 09:02 AM.