Cab for patches
 

Send me a picture or post it here and I will see if good on my cab.

Re: Cab for patches
 

How is the whole top? Is it a clearance lamp top?

Re: Cab for patches
 

How Is the section on the passenger side behind the door? I'm interested in the white area between the upper and lower moulding screws from the door opening to around the back of the cab to the edge of the first pleat. Pretty much everything that is painted white in your first photo. Shipped to 15332.
Thanks

Re: Cab for patches
 

I'd be interested in the entire inner cowl if its in decent shape. Maybe even from the bottom of the a pillar to the front of the floor...

Thanks,
Trent

Re: Cab for patches
 

Tim front part of cab is the worst inner/outer that is why I am cutting it up.
724 Jack's could you highlight the piece you want I think I know but want to be sure. If it's the piece I am thinking how does $60.00 shipped to you sound. I will double check but I think its pretty soild.
Trent could you post me a few pictures?

Re: Cab for patches
 

drivers side above gas fill to bottom body line around to back. any better pics? shipped to 48114

Re: Cab for patches
 

Hopefully the picture uploaded... everything painted white in the blue circle. Let me know that it is solid, no putty. If it's good I'll do 60. Thanks

Re: Cab for patches
 

Cdub2010 your piece looks good except it has a little mud where cab corner was replaced see pictures $75.00 shipped to you.
724jacks you'res looks good and solid.
A few pictures for. Bullockchevy.

Re: Cab for patches
 

More pictures

Re: Cab for patches
 

Picture

Re: Cab for patches
 

Thanks. PM and PayPal sent

Re: Cab for patches
 

Thanks

Re: Cab for patches
 

Bill, I have two cabs that need help. One got a dent in the edge of the top above the passenger door and the other is rusted between the cargo lamp and window. I'd just get the rear 1/2 of the top with top of window but for shipping. I'll take a picture of the dent and measure for around the light

Re: Cab for patches
 

Ok tim let know measurements.

Re: Cab for patches
 

AC vacuum actuator inner and outer in pictures 1 and 10 if in working condition with plastic firewall insert also.

Re: Cab for patches
 

Undone could you highlight my picture or post another one of every thing you are interested in. Thanks bill

Re: Cab for patches
 

Pictures of ac parts asked about.

Re: Cab for patches
 

Ok I will check them out closer . On upper one you need about 4 or 5 inches on each side?

Re: Cab for patches
 

No patches, just the actual AC vacuum actuator inner and outer if in working condition and the white plastic bushing for the one on the firewall.

Re: Cab for patches
 

Ok undone will check tomorrow

Re: Cab for patches
 

Undone here are the parts you ask for except for the plastic part it was broken on the inside. They seem to be working ok does $30.00 shipped to you sound ok.

Re: Cab for patches
 

I just found a set I had already purchased. Thanks for your time.

Re: Cab for patches
 

You're welcome.

Re: Cab for patches
 

Tim have you had time to get me some measurements yet?
Thanks bill

Re: Cab for patches
 

Bill
I am interested in those Ac Parts undone passed on.
Is the door and vacuum pod in good shape?
Attachment 2015189


Let me know.