The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Quick Question...Heater Box (https://67-72chevytrucks.com/vboard/showthread.php?t=806589)

roll_the_dice 05-20-2020 07:06 PM
Quick Question...Heater Box Screws
 
1 Attachment(s)
I am starting to install my Vintage air system. I got a cowl heater block off plate. I thought I would receive new screws, but it uses the OEM screws. I sold my heater box/core and screws. What size do I need? I know there are 5...Thanks for any help.

The Rocknrod 05-20-2020 08:46 PM
Re: Quick Question...Heater Box
 
Dont know, I think 1/4"-20. But here is a great thread on the subject:
http://67-72chevytrucks.com/vboard/s...d.php?t=488618

roll_the_dice 05-20-2020 09:03 PM
Re: Quick Question...Heater Box
 
1 Attachment(s)
Thanks, I was thinking 1/4x20 might be it...I think I have some laying around. I will try one tomorrow...but I am perusing the link you posted (thanks) and saw this drawing...but it just says existing screws...not the actual size.

Captainfab 05-20-2020 09:53 PM
Re: Quick Question...Heater Box
 
The originals are #14 x 3/4" hex washer head sheetmetal screws. That is what I supply with my heater block off plates.

The Rocknrod 05-21-2020 07:39 AM
Re: Quick Question...Heater Box
 
Something like this? https://www.homedepot.com/p/Hillman-...3259/202242949
Sheetmetal would make sense.

roll_the_dice 05-21-2020 08:47 AM
Re: Quick Question...Heater Box
 
Thanks guys...I knew someone would have the answer. I couldn't find it and I searched and googled for at least an hour!


All times are GMT -4. The time now is 10:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com