The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   CA Wanted truck rally trim rings (https://67-72chevytrucks.com/vboard/showthread.php?t=806654)

a1vintage69 05-22-2020 10:37 AM

Wanted truck rally trim rings
 
1 Attachment(s)
I am looking to buy a nice set of rally wheel trim rings. they can be truck or car but have to be 15". I will take one or a whole set of four. Here is a picture of Corvette 3" rings on my Blazer.

1970 CST Short Wide 05-22-2020 06:55 PM

Re: Wanted truck rally trim rings
 
1 Attachment(s)
I have a pair of 2” 15s. There re pops from China. You can have them for shipping cost if you want them

a1vintage69 05-22-2020 08:16 PM

Re: Wanted truck rally trim rings
 
Thank you for the generous offer for the 2". a set of the 2-1/2's would be ok but I really want wider ones.a1

Ironhorse 05-22-2020 08:37 PM

Re: Wanted truck rally trim rings
 
How "nice" are you looking for? I have some original 15'' GM brushed finish stainless steel 3'' trim rings in the stash. Not sure if I have a full set or a pair or...? Let me know how nice and how many you need. I can look tomorrow.

a1vintage69 05-22-2020 08:45 PM

Re: Wanted truck rally trim rings
 
Quote:

Originally Posted by Ironhorse (Post 8744517)
How "nice" are you looking for? I have some original 15'' GM brushed finish stainless steel 3'' trim rings in the stash. Not sure if I have a full set or a pair or...? Let me know how nice and how many you need. I can look tomorrow.

I would consider driver condition. just not big dings and road or curb rash. thanks,a1

Ironhorse 05-23-2020 08:11 AM

Re: Wanted truck rally trim rings
 
5 Attachment(s)
Pics of the last three trim rings I have. Two are polished stainless and one is brushed finish stainless. Nice 10' driver quality with some minor scuffing or dings. Side by side pair are polished, lower trim ring brushed finish. No big dents and hard curbed edges. Hard to show condition with stainless and chrome. All I have right now, $10 each plus shipping.

a1vintage69 05-23-2020 08:18 AM

Re: Wanted truck rally trim rings
 
thanks Ironhorse, I am headed out to look at some today locally .

Ironhorse 05-23-2020 08:23 AM

Re: Wanted truck rally trim rings
 
Not a problem, let me know if have an interest.

John H. 05-23-2020 09:50 AM

Re: Wanted truck rally trim rings
 
You may look into these. I asked and they do have a stem slot. They look to have the GM style holders.

https://www.ebay.com/itm/15-NOS-CHEV...112133686435ui

1970 CST Short Wide 05-23-2020 04:53 PM

Re: Wanted truck rally trim rings
 
1 Attachment(s)
Quote:

Originally Posted by a1vintage69 (Post 8744489)
Thank you for the generous offer for the 2". a set of the 2-1/2's would be ok but I really want wider ones.a1

No problem I’ll put them back on the shelf. I have the wider ones on my truck

Ironhorse 05-25-2020 06:51 PM

Re: Wanted truck rally trim rings
 
a1, any interest in the 3'' rings I have? Not show but nice driver 10 footers and original GM.

a1vintage69 05-25-2020 06:56 PM

Re: Wanted truck rally trim rings
 
Quote:

Originally Posted by Ironhorse (Post 8746238)
a1, any interest in the 3'' rings I have? Not show but nice driver 10 footers and original GM.

Can you do $50 shipped?

Ironhorse 05-25-2020 07:28 PM

Re: Wanted truck rally trim rings
 
Quote:

Originally Posted by a1vintage69 (Post 8746241)
Can you do $50 shipped?

I can do $50 shipped for all three if you can do a money order as I don't have Paypal. LMK if that works for you and I will PM my mailing info.

Ironhorse 05-25-2020 09:09 PM

Re: Wanted truck rally trim rings
 
Trim rings SOLD to a1vintage69. PM sent with payment info. Thanks, :chevy:

CarlsLQ9SS 05-25-2020 09:43 PM

Re: Wanted truck rally trim rings
 
Did you find all 4?

a1vintage69 05-25-2020 09:54 PM

Re: Wanted truck rally trim rings
 
Quote:

Originally Posted by CarlsLQ9SS (Post 8746362)
Did you find all 4?

I still need a matching set of 4. or two like the ones ironhorse posted.

CarlsLQ9SS 05-25-2020 09:58 PM

Re: Wanted truck rally trim rings
 
Quote:

Originally Posted by a1vintage69 (Post 8746370)
I still need a matching set of 4. or two like the ones ironhorse posted.

I have some extras but not sure on the condition. I will check them tomorrow and let you know. Do you still have the deluxe radio knobs?

a1vintage69 05-25-2020 10:05 PM

Re: Wanted truck rally trim rings
 
Quote:

Originally Posted by CarlsLQ9SS (Post 8746375)
I have some extras but not sure on the condition. I will check them tomorrow and let you know. Do you still have the deluxe radio knobs?

Yes,68-72 deluxe radio knobs

CarlsLQ9SS 05-25-2020 10:17 PM

Re: Wanted truck rally trim rings
 
Quote:

Originally Posted by a1vintage69 (Post 8746382)
Yes,68-72 deluxe radio knobs

If I have some decent ones we may get on some kind of trade. I dont know what they or worth though

CarlsLQ9SS 05-26-2020 04:58 PM

Re: Wanted truck rally trim rings
 
5 Attachment(s)
Pics

CarlsLQ9SS 05-26-2020 05:01 PM

Re: Wanted truck rally trim rings
 
3 Attachment(s)
Few more

a1vintage69 05-26-2020 07:58 PM

Re: Wanted truck rally trim rings
 
Carl, those are good for a driver rig. how much do you want? send me a pm. thanks, a1

CarlsLQ9SS 05-26-2020 09:01 PM

Re: Wanted truck rally trim rings
 
Sent you a PM, the two best ones are pictured. The third isn't any good

CarlsLQ9SS 05-27-2020 02:13 PM

Re: Wanted truck rally trim rings
 
1 Attachment(s)
Tracking number.


All times are GMT -4. The time now is 08:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com