The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - speedo cable installation (https://67-72chevytrucks.com/vboard/showthread.php?t=807140)

oldtrux

05-31-2020 02:50 PM

speedo cable installation

is there some type of clamp that mounts on frame or crossmember to hold speedo cable secure?it's been a long time but i think i remember some type of clip/clamp on crossmember.. thx

64 rust

06-01-2020 09:00 AM

Re: speedo cable installation

Not sure if it helps but on my straight 6 there is a bracket that mounts to my intake that holds the speedo cable.

The Rocknrod

06-02-2020 10:44 AM

Re: speedo cable installation

From where it exits the firewall the only place I can see using a clip would be maybe the inside of the frame next to the tranny.
http://67-72chevytrucks.com/vboard/s...53&postcount=9

All times are GMT -4. The time now is 05:42 AM.